نمایش نتایج جستجو برای
نام مجله: Journal of Alloys and Compounds
موارد یافت شده: 63
1 - Microstructure evolution of Ni-Cr-Mo superalloy fabricated by microwave-assisted combustion synthesis (چکیده)2 - Structural investigation and hydrogenation properties of TiZrXMnFeNi (X = Cr, Mo, and W) high entropy alloys (چکیده)
3 - Improving the cathodic performance of La0.7Sr1.3CoO4 by substituting Ni in Co sites for intermediate solid oxide fuel cells application (چکیده)
4 - Research on hot deformation behavior and constitutive model to predict flow stress of an annealed FeCrCuNi2Mn2 high-entropy alloy (چکیده)
5 - The comparative study of doping Cu and Fe on the cathodic properties of La0.7Sr1.3CoO4 layered perovskite compound: To be used in IT-SOFC (چکیده)
6 - The effect of hydrogen pressure on magnetic properties of Zr2(Co0.5Fe0.2Ni0.2V0.1) alloy (چکیده)
7 - Effect of hybrid carbonaceous reinforcement on structure, mechanical and wear properties of spark plasma sintered CrCoFeMnNi HEA/GNP+CNT composite (چکیده)
8 - A comprehensive review on the effects of doping process on the thermoelectric properties of Bi2Te3 based alloys (چکیده)
9 - Study of structural, electrical and electrochemical properties of La0.7Sr1.3Co1−xFexO4 (x = 0, 0.1, 0.3, 0.5) Ruddlesden-Popper oxides as promising cathode for intermediate solid oxide fuel cells (چکیده)
10 - A study of hot compression behavior of an as-cast FeCrCuNi2Mn2 high-entropy alloy (چکیده)
11 - Ceria embedded nanocomposite coating fabricated by plasma electrolytic oxidation on titanium (چکیده)
12 - Effect of treatment time and temperature on microstructure and corrosion behavior of Zn-Ni electrophosphate coating (چکیده)
13 - Electrocrystallization of Ni nanocones from chloride-based bath using crystal modifier by electrochemical methods (چکیده)
14 - Comment on: “Investigation the effect of Pb incorporation on the surface characterizations of electrodeposited CdSe nanostructures” [J. Alloys Compd. 817 (2020) 152711] (چکیده)
15 - Comment on: “Structure, optical and transport properties of Mg-doped ZnMn2O4” [J. Alloys Compd. 655 (2016) 188–197] (چکیده)
16 - Effect of Fe and Co doping on structural and electrical properties of La0.5Sr1.5MnO4 layered-structure and the corresponding La0.5Sr0.5MnO3 perovskite (چکیده)
17 - The structure effect of carbonaceous reinforcement on the microstructural characterization and mechanical behavior of AZ80 magnesium alloy (چکیده)
18 - Synergistic effect of hybrid size ZrO2 and electroless nickel decoration on the mechanical and high temperature oxidation properties of NiCr–ZrO2 composites (چکیده)
19 - Synthesize of magnetite Mg-Fe mixed metal oxide nanocatalyst by urea-nitrate combustion method with optimal fuel ratio for reduction of emissions in diesel engines (چکیده)
20 - Ni–Cr matrix composites reinforced with nano- and micron-sized surface-modified zirconia: Synthesis, microstructure and mechanical properties (چکیده)
21 - A discussion on the formation mechanism of tungsten carbides during mechanical milling of CaWO4MgC mixtures (چکیده)
22 - Rapid consolidation of Al2O3-TiO2-Co nanocermets via spark plasma sintering of Co-coated ceramic particles (چکیده)
23 - Correlation between the histogram and power spectral density analysis of AFM and SKPFM images in an AA7023/AA5083 FSW joint (چکیده)
24 - Influence of carbon source content on the structure and performance of KOH/Ca12Al14O33eC nanocatalyst used in the transesterification reaction via microwave irradiation (چکیده)
25 - Effect of bonding time and homogenization heat treatment on the microstructure and mechanical properties of the transient liquid phase bonded dissimilar GTD-111/FSX-414 TLP superalloys (چکیده)
26 - A combined experimental and theoretical investigation of the Al-Melamine reactive milling system: A mechanistic study towards AlN-based ceramics (چکیده)
27 - The effect of cobalt-doping on microstructure and dielectric properties of CaCu3Ti4O12 ceramics (چکیده)
28 - Determination of martensite start temperature using an electromagnetic nondestructive technology (چکیده)
29 - Analytical and experimental investigation of the effect of SPS and hot rolling on the microstructure and flexural behavior of Ti6Al4V matrix reinforced with in-situ TiB and TiC (چکیده)
30 - A statistical approach to synthesis of functionally modified silica nanoparticles (چکیده)
31 - Electrochemical corrosion behavior of Pb-Ca-Sn -Sm grid alloy in H2 SO4 solution (چکیده)
32 - Electrochemical corrosion behavior of Pb-Ca-Sn-Sm grid alloy in H2SO4solution (چکیده)
33 - Effect of thermomechanical parameters on dynamically recrystallized grain size of AZ91 magnesium alloy (چکیده)
34 - On the microsegregation of Al–Mg alloys by thermal analysis and numerical modeling (چکیده)
35 - A comprehensive study on the microstructure of high strength low alloy pipeline welds (چکیده)
36 - The effect of Al 2 O 3 and CaO presence on the kinetics of mechanochemical reduction of MoS 2 by Zn (چکیده)
37 - Thermal expansion anomaly and magnetostriction of Nd2Fe14Si3 (چکیده)
38 - Fabrication of Fe/Al2O3 composite foam via combination of combustion synthesis and spark plasma sintering techniques (چکیده)
39 - Nickel–lithium oxide alloy transparent conducting films deposited by spray pyrolysis technique (چکیده)
40 - Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compocasting method and study of its properties (چکیده)
41 - One-step fabrication of Cu–Al2O3 nanocomposite via solution combustion synthesis route (چکیده)
42 - Production of carbon nanotubes using mechanical milling in the presence of an exothermic reaction (چکیده)
43 - Role of nano-size TiO2 particles on the crystallite size of microwave—Combustion synthesized Al2O3/TiC composite (چکیده)
44 - influnes of hydrogenation on structure and magnetic properties of HoFe11-xCoxTi (چکیده)
45 - Microstructural and mechanical properties (hardness) investigations of Al-alloyed ductile cast iron (چکیده)
46 - Influence of Co substitution on magnetoelastic properties of Er2Fe14-xCoxB (x = 1, 3 and 5) intermetallic compounds (چکیده)
47 - Magnetostriction and thermal expansion of interstitially modified NdFe10V2Zx (Z = N, H) compounds (چکیده)
48 - An investigation on the variations occurring during Ni3Al powder formation by mechanical alloying technique (چکیده)
49 - The influence of different heat treatment cycles on controlled surface graphitization in CK45 steel (چکیده)
50 - Investigation on the effects of hot forging parameters on the austenite grain size of vanadium microalloyed forging steel-30MSV6 (چکیده)
51 - An assessment of the process of Self-propagating High-Temperature Synthesisfor the fabrication of porous copper composite (چکیده)
52 - Coating of Al substrate by metallic Ni through mechanical alloying (چکیده)
53 - Optimizing the ignition behavior of microwave-combustion synthesizedAl2O3/TiC composite using Taguchi robust design method (چکیده)
54 - Control of carbon loss during synthesis of WC powder through ball milling of WO3-C-2Al mixture (چکیده)
55 - The effect of aluminothermic reaction on the progress of carbothermic reaction in simultaneous mechanochemical reduction of CuO and ZnO (چکیده)
56 - Effect of the aluminum content on the behavior of mechanochemical reactions in theWO3–C–Al system (چکیده)
57 - On the role of nano-size SiC on lattice strain and grain size of Al/SiC nanocomposite (چکیده)
58 - Influence of Austenitising Conditions and Aluminium Content on Microstructure and Properties of (چکیده)
59 - The influence of annealing temperature on the graphitisation of CK 45 Steel (چکیده)
60 - Microstructural characteristics of Al-alloyed austempered ductile irons (چکیده)
61 - The bainite transformation and the carbide precipitation of 4.88% aluminium austempered ductile iron investigated using electron microscopy (چکیده)
62 - Investigation of stress exponent in the room-temperature creep of Sn–40Pb–2.5Sb solder alloy (چکیده)
63 - Effects of cooling rate on the microstructure and mechanical properties of the Ni-base superalloy UDIMET 500 (چکیده)
