Title : Flexural behavior of reinforced concrete beams strengthened by CFRP sheets ( Flexural behavior of reinforced concrete beams strengthened by CFRP sheets )
Authors: Mohammad Reza Esfahani , M.R. Kianoush , - - ,Access to full-text not allowed by authors
Abstract
Keywords: CFRP; Flexural strengthening; Reinforcing bar ratio; Reinforced concrete beams
Keywords
This paper investigates the flexural behaviour of reinforced concrete beams strengthened using Carbon Fibre Reinforced Polymers (CFRP) sheets. The effect of reinforcing bar ratio on the flexural strength of the strengthened beams is examined. Twelve concrete beam specimens with dimensions of 150@article{paperid:1005678,
author = {Esfahani, Mohammad Reza and M.R. Kianoush and -, -},
title = {Flexural behavior of reinforced concrete beams strengthened by CFRP sheets},
journal = {Engineering Structures},
year = {2007},
volume = {29},
number = {10},
month = {June},
issn = {0141-0296},
pages = {2428--2444},
numpages = {16},
keywords = {This paper investigates the flexural behaviour of reinforced concrete beams strengthened using Carbon Fibre Reinforced Polymers (CFRP)
sheets. The effect of reinforcing bar ratio on the flexural strength of the strengthened beams is examined. Twelve concrete beam specimens with
dimensions of 150 mm width; 200 mm height; and 2000 mm length were manufactured and tested. Beam sections with three different reinforcing
ratios; ; were used as longitudinal tensile reinforcement in specimens. Nine specimens were strengthened in flexure by CFRP sheets. The other
three specimens were considered as control specimens. The width; length and number of layers of CFRP sheets varied in different specimens.
The flexural strength and stiffness of the strengthened beams increased compared to the control specimens. From the results of this study; it is
concluded that the design guidelines of ACI 440.2R-02 and ISIS Canada overestimate the effect of CFRP sheets in increasing the flexural strength
of beams with small values compared to the maximum value; max; specified in these two guidelines.With the increase in the value in beams;
the ratios of test load to the load calculated using ACI 440 and ISIS Canada increased. Therefore; the equations proposed by the two design
guidelines are more appropriate for beams with large values. In the strengthened specimens with the large reinforcing bar ratio; close to the
maximum code value of max; failure occurred with adequate ductility.},
}
%0 Journal Article
%T Flexural behavior of reinforced concrete beams strengthened by CFRP sheets
%A Esfahani, Mohammad Reza
%A M.R. Kianoush
%A -, -
%J Engineering Structures
%@ 0141-0296
%D 2007