This paper investigates the mechanical behavior of inherently-anisotropic granular materials from macroscopic and microscopic points of view. The study is achieved by simulating biaxial compression tests performed on granular assemblies by using numerical discrete element method. In the same category of numerical studies found in the literature, the simulations were performed by considering elliptical/oval particles. In the present study, however, the shape of particles is considered as convex polygons, which mostly resembles real sand grains. Particle assemblies with four different bedding angles were tested. Similar to what observed in experiment, inherent anisotropy has a significant effect on macroscopic mechanical behavior of granular materials. The shear strength and dilative behavior of assemblies were found to decrease as the bedding angle increases. Evolution of the microstructure of all samples and the influence of bedding angle on the fabric and force anisotropy during loading process were investigated. It is seen that the microscopic evolutions in the fabric can justify well the macroscopic behavior of granular assemblies. It is found that the long axis of particles tend to be inclined perpendicular to the loading axis, which results in generating more stable column-like microstructures in order to transfer the applied load.Moreover, the number of contacts as well as the magnitude of forces among particles varies in different directions during the loading process and the initial anisotropy condition totally evolves due to the induced anisotropy within samples.

Keywords