Peritendinous adhesion is considered a major postsurgical tendon complication in hand surgery. This complication could be mitigated partially through early tendon mobilization. However, development of new treatment modalities to guide tissue regeneration and to reduce postsurgical tendon adhesion has recently gained attentions. In this article, synthesis and characterization of electrospun nanofibrous membranes (NFMs) of polycaprolactone (PCL) and chitosan to form a physical barrier against cellular migration leading to tendon adhesion is presented. The mechanical properties of theNFMs are modulated to maintain high integrity during postsurgical tendon mobilization. The tensile strength of theNFMs is examined inwet and dry conditions after 1000 cyclic pull loadings. In addition, the mechanical strength of the NFMs is evaluated after a degradation period of 30 days. To obtain NFM with desired properties, concentrations of polymer solutions, operation parameters of electrospinning and the thickness of NFMs were optimized. Based on the biodegradation and mechanical evaluations, the optimum NFM was obtained for specified amounts of PCL (5 wt %) + chitosan (2 wt %) at an electrospinning drum speed of 400 rpm. The engineered NFM could withstand forces of 33 and 19 N before and after 1000 pull cycles that are sufficient during tendon healing process. The bonding of chitosan fibers over PCL nanofibers allowed for production of NFMs with appropriate mechanical integrity and degradation rate. In vitro cell culture tests demonstrated that PCL/chitosan could only have minor impact on decreasing fibroblast attachment over themembranes probably due to protonation of amine groups.

Keywords