19th International Symposium on Metastable, Amorphous and Nanostructured Materials ISMANAM 2012 , 2012-06-18

Title : ( On the milling and preheating on fabrication of NiTi produced by combustion synthesised NiTi )

Authors: Abolfazl Babakhani , hassan mostajab o daveh , Alireza Sadeghi , Seyed Mojtaba Zebarjad ,

Citation: BibTeX | EndNote

Abstract The main goal of the current research has been concentrated on the fabrication of NiTi alloy using combustion synthesis. The effect of preheating temperature and milling time on the fabrication of porous NiTi has been considered. For this purpose Ni and Ti with 50 at.% Ni powders were milled and cold pressed under 150MPa pressures. The porous NiTi alloy samples were synthesized by self-propagating high-temperature synthesis (SHS) at the different preheating temperatures (i.e. 350, 400, 500 and 600 ◦C) and milling time (0.5, 1 and 2h). The crystal structure of all samples was characterized by X-ray diffraction pattern. The results show that the product sample is NiTi phase along with other secondary intermetallic compounds. The results prove that the dominant phase is NiTi if the powders milled 1 hour milling and preheated 400◦C.

Keywords

Key word: milling; preheating; NiTi; combustion
برای دانلود از شناسه و رمز عبور پرتال پویا استفاده کنید.

@inproceedings{paperid:1029638,
author = {Babakhani, Abolfazl and Mostajab O Daveh, Hassan and Sadeghi, Alireza and Zebarjad, Seyed Mojtaba},
title = {On the milling and preheating on fabrication of NiTi produced by combustion synthesised NiTi},
booktitle = {19th International Symposium on Metastable, Amorphous and Nanostructured Materials ISMANAM 2012},
year = {2012},
location = {مسکو},
keywords = {Key word: milling; preheating; NiTi; combustion synthesis},
}

[Download]

%0 Conference Proceedings
%T On the milling and preheating on fabrication of NiTi produced by combustion synthesised NiTi
%A Babakhani, Abolfazl
%A Mostajab O Daveh, Hassan
%A Sadeghi, Alireza
%A Zebarjad, Seyed Mojtaba
%J 19th International Symposium on Metastable, Amorphous and Nanostructured Materials ISMANAM 2012
%D 2012

[Download]