مقالات ارائه شده در مجلات

فارسی

  1. سید میراله حسینی , محمد حاتمی , عزیز وظیفه شناس , حل عددی معادلات دیفرانسیل جزئی حاکم بر میدان مغناطیسی در جریان هندسه نوک تیز در ماخ و ارتفاعات بالا و اثر آن بر ضرایب دراگ و لیفت, ﭘﮋوﻫﺶﻫﺎی ﻧﻮﯾﻦ در رﯾﺎﺿﯽ, دوره (1), شماره (1), سال (2021-8), صفحات (1-8)
  2. رضا کامرانی , مهرداد جعفریار , محمد حاتمی , بهینه سازی عددی هندسه هیدروفویل یک پره توربین هیدرولیکی داریوس به کمک شبکه بندی دینامیکی و روش طراحی مرکب مرکزی, سد و نیروگاه برق آبی, دوره (28), شماره (28), سال (2021-5), صفحات (102-106)
  3. محمد حاتمی , علی قلی پور , مطالعه تجربی و بهینه سازی عددی پارامترهای هندسی مشعل در کوره پیش گرم خط پرس مجتمع صنعتی فولاد اسفراین, مهندسی مکانیک مدرس, دوره (21), شماره (7), سال (2021-5), صفحات (479-488)
  4. علی قربانیان , محمد حاتمی , مصطفی طهری , فرید نعیمی , بهینه‌سازی پارامترهای فرایند اصطکاکی اغتشاشی (FSP)، برای بهبود سختی و مقاومت به سایش Al-2024 توسط روش سطح پاسخ, علوم و مهندسی سطح, دوره (37), شماره (37), سال (2019-1), صفحات (71-82)

انگلیسی

  1. Qusay Rasheed Al-Amir , Hameed K. Hamzah , Farooq H. Ali , Mohammad Hatami , Wael Al-Kouz , Ahmed Al-Manea , Raed Al-Rbaihat , Ali Alahmer , Investigation of Natural Convection and Entropy Generation in a Porous Titled Z-Staggered Cavity Saturated by TiO2-Water Nanofluid, International Journal of Thermofluids, Volume (19), No (19), Year (2023-8), Pages (100395-100395)
  2. P. V. Ananth Subray , B. N. Hanumagowda , S. V. K. Varma , Mohammad Hatami , The impacts of shape factor and heat transfer on two-phase flow of nano and hybrid nanofluid in a saturated porous medium, Scientific Reports, Volume (12), No (1), Year (2022-12)
  3. Hatira , Hadi Rezazadeh , Waleed Adel , Mohammad Hatami , Kulandairaj Martin Sagayam , Homan Emadifar , Muhammad Imran , Faraidun K Hamasalh , Ahmed A Hamoud , Analytical approximate solution of fractional order smoking epidemic model, Advances in Mechanical Engineering, Volume (12), No (55), Year (2022-9), Pages (105966-2147483647)
  4. Obai Younis , Aissa Abderrahmane , Mohammad Hatami , Abed , Kamel , Thermal energy storage using nano phase change materials in corrugated plates heat exchangers with different geometries, Journal of Energy Storage, Volume (55), No (55), Year (2022-11), Pages (105785-105785)
  5. Kourosh Ghadamkheir , J. Zareei , Xiaohu Yang , Mohammad Hatami , The effects of diesel-OME1 blended fuel on combustion characteristics of a heavy-duty compression ignition engine by a numerical study, Alexadria Engineering Journal, Volume (64), Year (2023-2), Pages (493-503)
  6. A. B. Vishalakshi , U. S. Mahabaleshwar , Mohammad Hatami , MHD Casson carbon nanotube flow with mass and heat transfer under thermosolutal Marangoni convection in a porous medium: analytical solution, Scientific Reports, Volume (12), No (1), Year (2022-9)
  7. U. S. Mahabaleshwar , T. Anusha , Mohammad Hatami , Analysis of a Stagnation Point Flow With Hybrid Nanoparticles Over a Porous Medium, Fluid Dynamics and Materiald Processing, Volume (22), No (22), Year (2022-5), Pages (2002-2002)
  8. Jinghua Li , Mohammad Hatami , Yalong Huang , Bing Luo , Dengwei Jing , Lijing Ma , Efficient photothermal catalytic hydrogen production via plasma-induced photothermal effect of Cu/TiO2 nanoparticles, International Journal of Hydrogen Energy, Volume (48), No (16), Year (2023-2), Pages (6336-6345)
  9. Fei Xue , Haochen Wu , Yuting Liu , Moya Min , Mohammad Hatami , Naixu Li , Maochang Liu , CuS nanosheet-induced local hot spots on g-C 3 N 4 boost photocatalytic hydrogen evolution, International Journal of Hydrogen Energy, Volume (133), No (133), Year (2022-6), Pages (105966-105966)
  10. U. S. Mahabaleshwar , K. N. Sneha , Mohammad Hatami , Effect of Cattaneo-Christov approximation for viscoelastic fluid with carbon nanotubes on flow and heat transfer, Scientific Reports, Volume (12), No (12), Year (2022-6), Pages (9485-9485)
  11. Zahraa H. Saadoon , Farooq H. Ali , Hameed K. Hamzah , Azher M. Abed , Mohammad Hatami , Improving the performance of mini-channel heat sink by using wavy channel and different types of nanofluids, Scientific Reports, Volume (12), No (1), Year (2022-6)
  12. Kh.Hosseinzadeh , M.A.Erfani Moghaddam , Mohammad Hatami , D.D.Ganji , FathollahOmmi , Experimental and numerical study for the effect of aqueous solution on heat transfer characteristics of two phase close thermosyphon, International Communication in Heat and Mass Transfer, Volume (135), No (135), Year (2022-6), Pages (106129-106129)
  13. U. S. Mahabaleshwar , K. N. Sneha , Akio Miyara , Mohammad Hatami , Radiation effect on inclined MHD flow past a super-linear stretching/shrinking sheet including CNTs, Waves in Random and Complex Media, Year (2022-3)
  14. K. N. Sneha , U. S. Mahabaleshwar , A. Chan , Mohammad Hatami , Investigation of radiation and MHD on non-Newtonian fluid flow over a stretching/shrinking sheet with CNTs and mass transpiration, Waves in Random and Complex Media, Year (2022-2)
  15. Hameed K. Hamzah , Farooq H. Ali , Mohammad Hatami , MHD mixed convection and entropy generation of CNT-water nanofluid in a wavy lid-driven porous enclosure at different boundary conditions, Scientific Reports, Volume (12), No (1), Year (2022-2)
  16. U.S. Mahabaleshwar , A.B. Vishalakshi , Mohammad Hatami , MHD micropolar fluid flow over a stretching/shrinking sheet with dissipation of energy and stress work considering mass transpiration and thermal radiation, International Communication in Heat and Mass Transfer, Volume (133), No (133), Year (2022-4), Pages (105966-105966)
  17. Aissa Abderrahmane , Mohammad Hatami , Obai Younis , Abed Mourad , Effect of double rotating cylinders on the MHD mixed convection and entropy generation of a 3D cubic enclosure filled by nano-PCM, European Physical Journal: Special Topics, Volume (231), Year (2022-9), Pages (2569-2581)
  18. Qusay Rasheed Al-Amir , Hameed K. Hamzah , Farooq H. Ali , Seyfettin Bayraktar , Muslum , Mohammad Hatami , Comparison study of vertical and horizontal elastic wall on vented square enclosure filled by nanofluid and hexagonal shape with MHD effect, European Physical Journal: Special Topics, Volume (231), Year (2022-9), Pages (2623-2643)
  19. Mohammad Hatami , Abbas Heydari , Thermal optimization for the tangential swirl burner at the rotary furnace of steel pipe industry to save energy and reduce emissions, Alexadria Engineering Journal, Volume (61), No (9), Year (2021-12), Pages (6675-6694)
  20. T. Anusha , U.S. Mahabaleshwar , Mohammad Hatami , Navier slip effect on the thermal-flow of Walters’ liquid B flow due to porous stretching/shrinking with heat and mass transfer, Case Studies in Thermal Engineering, Volume (28), No (28), Year (2021-12), Pages (101691-101691)
  21. Hameed K. Hamzah , Doaa F. Kareem , Saba Y. Ahmed , Farooq H. Ali , Mohammad Hatami , Heatlines Analysis of Natural Convection in an Enclosure Divided by Sinusoidal Porous Layer and Filled by Cu-Water Nanofluid with Magnetic Field Effect, Iranian Journal of Chemistry and Chemical Engineering, Volume (247611), No (247611), Year (2021-12), Pages (4272-4272)
  22. Mohammad Hatami , S.E. Ghasemi , Thermophoresis and Brownian diffusion of nanoparticles around a vertical cone in a porous media by Galerkin finite element method (GFEM), Case Studies in Thermal Engineering, Volume (28), No (28), Year (2021-12), Pages (101627-101627)
  23. AISSA Abderrahmane , Mohammad Hatami , M.A. Medebber , Sahraoui Haroun , Sameh E. Ahmed , Sahnoun Mohammed , Non-Newtonian nanofluid natural convective heat transfer in an inclined Half-annulus porous enclosure using FEM, Alexadria Engineering Journal, Volume (61), No (7), Year (2021-11), Pages (5441-5453)
  24. Ben Hamida , Mohammad Hatami , Investigation of heated fins geometries on the heat transfer of a channel filled by hybrid nanofluids under the electric field, Case Studies in Thermal Engineering, Volume (28), Year (2021-12), Pages (101450-101450)
  25. U. S. Mahabaleshwar , T. Anusha , Mohammad Hatami , The MHD Newtonian hybrid nanofluid flow and mass transfer analysis due to super-linear stretching sheet embedded in porous medium, Scientific Reports, Volume (11), No (1), Year (2021-11)
  26. Maryam Hasanpour , Siamak Motahari , Dengwei Jing , Mohammad Hatami , Statistical analysis and optimization of photodegradation efficiency of methyl orange from aqueous solution using cellulose/zinc oxide hybrid aerogel by response surface methodology (RSM), Arabian Journal of Chemistry, Volume (14), No (11), Year (2021-11), Pages (103401-103401)
  27. H. Behzadnia , Hui Jin , M. Najafian , Mohammad Hatami , Investigation of super-critical water-based nanofluid with different nanoparticles (shapes and types) used in the rectangular corrugated tube of reactors, Alexadria Engineering Journal, Volume (61), No (3), Year (2022-3), Pages (2330-2347)
  28. M.E. Nakhchi , Mohammad Hatami , M. Rahmati , Effects of CuO nano powder on performance improvement and entropy production of double-pipe heat exchanger with innovative perforated turbulators, Advanced Powder Technology, Volume (32), No (8), Year (2021-8), Pages (3063-3074)
  29. Maryam Hasanpour , Siamak Motahari , Dengwei Jing , Mohammad Hatami , Investigation of operation parameters on the removal efficiency of methyl orange pollutant by cellulose/zinc oxide hybrid aerogel, Chemosphere, Volume (284), No (284), Year (2021-12), Pages (131320-131320)
  30. M.E. Nakhchi , Mohammad Hatami , M. Rahmati , Experimental evaluation of performance intensification of double-pipe heat exchangers with rotary elliptical inserts, Chemical Engineering and Processing, Volume (169), Year (2021-12), Pages (108615-108625)
  31. Maryam Hassanpour , Simak Motahari , Dengwei Jing , Mohammad Hatami , Numerical Modeling for the Photocatalytic Degradation of Methyl Orange from Aqueous Solution using Cellulose/Zinc Oxide Hybrid Aerogel: Comparison with Experimental Data, Topics in Catalysis, Year (2021-5)
  32. Maryam Hassanpour , Siamak Motahari , Dengwei Jing , Mohammad Hatami , Investigation of the Different Morphologies of Zinc Oxide (ZnO) in Cellulose/ZnO Hybrid Aerogel on the Photocatalytic Degradation Efficiency of Methyl Orange, Topics in Catalysis, Year (2021-7)
  33. Mohamed Bechir Ben Hamida , Mohammad Hatami , Optimization of fins arrangements for the square light emitting diode (LED) cooling through nanofluid-filled microchannel, Scientific Reports, Volume (11), No (1), Year (2021-6)
  34. M.E. Nakhchi , Mohammad Hatami , M. Rahmati , Experimental investigation of performance improvement of double-pipe heat exchangers with novel perforated elliptic turbulators, International Journal of Thermal Sciences, Volume (168), No (168), Year (2021-10), Pages (107057-107057)
  35. Dengwei Jing , Songwei Hu , Mohammad Hatami , Yuanxiang Xiao , Jianpeng Jia , Thermal analysis on a nanofluid-filled rectangular cavity with heated fins of different geometries under magnetic field effects, Journal of Thermal Analysis and Calorimetry, Volume (139), No (6), Year (2020-3), Pages (3577-3588)
  36. Mohammad Hatami , Different shapes of Fe3O4 nanoparticles on the free convection and entropy generation in a wavy-wall square cavity filled by power-law non-Newtonian nanofluid, International Journal of Heat and Technology, Volume (36), No (2), Year (2018-6), Pages (509-524)
  37. Mohammad Hatami , D. Jing , Majeed A. Yousif , Three-dimensional analysis of condensation nanofluid film on an inclined rotating disk by efficient analytical methods, Arab Journal of Basic and Applied Sciences, Volume (25), No (1), Year (2018-1), Pages (28-37)
  38. Dongxing Song , Mohammad Hatami , Jiandong Zhou , Dengwei Jing , Dynamic Nanoparticle Aggregation for a Flowing Colloidal Suspension with Nonuniform Temperature Field Studied by a Coupled LBM and PBE Method, Industrial and Engineering Chemistry Research, Volume (56), No (38), Year (2017-9), Pages (10886-10899)
  39. Jingyu Jin , Mohammad Hatami , Dengwei Jing , Experimental investigation and prediction of the thermal conductivity of water-based oxide nanofluids with low volume fractions, Journal of Thermal Analysis and Calorimetry, Volume (135), No (1), Year (2019-1), Pages (257-269)
  40. S. Mosayebidorcheh , Mohammad Hatami , T. Mosayebidorcheh , D. Jing , Two-Phase Nanofluid Thermal Analysis over a Stretching Infinite Solar Plate Using Keller Box Method (KBM), Iranian Journal of Chemistry and Chemical Engineering, Volume (37), No (6), Year (2018-12), Pages (247-256)
  41. Mohammad Hatami , S. Mosayebidorcheh , D. Jing , Nanofluid Condensation and MHD Flow Modeling over Rotating Plates Using Least Square Method (LSM), Iranian Journal of Chemistry and Chemical Engineering, Volume (37), No (4), Year (2018-8), Pages (1-13)
  42. Mohammad Hatami , Jiafeng Geng , Dengwei Jing , Enhanced efficiency in Concentrated Parabolic Solar Collector (CPSC) with a porous absorber tube filled with metal nanoparticle suspension, Green Energy and Environment, Volume (3), No (2), Year (2018-4), Pages (129-137)
  43. Mohammad Hatami , Cross-sectional heat transfer of hot tubes in a wavy porous channel filled by Fe3O4-water nanofluid under a variable magnetic field, European Physical Journal Plus, Volume (133), No (9), Year (2018-9)
  44. Mohammad Hatami , F. Naeimi , M. Shamanian , M. Tahari , High-Temperature Oxidation Behavior of Nano-structured CoNiCrAlY–YSZ Coatings Produced by HVOF Thermal Spray Technique, Oxidation of Metals, Volume (90), No (90), Year (2018-8), Pages (153-167)
  45. S.S. Ghadikolaei , Kh. Hosseinzadeh , Mohammad Hatami , D.D. Ganji , MHD boundary layer analysis for micropolar dusty fluid containing Hybrid nanoparticles (Cu‑Al2O3) over a porous medium, Journal of Molecular Liquids, Volume (268), No (268), Year (2018-10), Pages (813-823)
  46. S. Mosayebidorcheh , Mohammad Hatami , Analytical investigation of peristaltic nanofluid flow and heat transfer in an asymmetric wavy wall channel (Part II: Divergent channel), International Journal of Heat and Mass Transfer, Volume (126), No (126), Year (2018-11), Pages (800-808)
  47. S. Mosayebidorcheh , Mohammad Hatami , Analytical investigation of peristaltic nanofluid flow and heat transfer in an asymmetric wavy wall channel (Part I: Straight channel), International Journal of Heat and Mass Transfer, Volume (126), No (126), Year (2018-11), Pages (790-799)
  48. Mohammad Hatami , Jingyu Jin , Hamid Reza Ashorynejad , Dengwei Jing , Uniform Magnetic field (UMF) Effect on the Heat Transfer of a Porous Half-Annulus Enclosure Filled by Cu-Water Nanofluid Considering Heat Generation, Current Nanoscience, Volume (14), No (3), Year (2018-4), Pages (187-198)
  49. Mohammad Hatami , Mehdi KHAZAYINEJAD , Jiandong ZHOU , Dengwei JING , Three-dimensional and two-phase nanofluid flow and heat transfer analysis over a stretching infinite solar plate, Thermal Science, Volume (22), No (2), Year (2018-1), Pages (871-884)
  50. P. Valipour , H. Zaersabet , Mohammad Hatami , Ali Zolfagharian , S.E. Ghasemi , Numerical study on polymer nanofibers with electrically charged jet of viscoelastic fluid in electrospinning process, Journal of Central South University, Volume (24), No (10), Year (2017-10), Pages (2275-2280)
  51. S.S. Ghadikolaei , Kh. Hosseinzadeh , D.D. Ganji , Mohammad Hatami , Fe3O4–(CH2OH)2 nanofluid analysis in a porous medium under MHD radiative boundary layer and dusty fluid, Journal of Molecular Liquids, Volume (258), No (258), Year (2018-5), Pages (172-185)
  52. Mohammad Hatami , J. Zhou , J. Geng , D. Jing , Variable magnetic field (VMF) effect on the heat transfer of a half-annulus cavity filled by Fe3O4-water nanofluid under constant heat flux, Journal of Magnetism and Magnetic Materials, Volume (451), No (451), Year (2018-4), Pages (173-182)
  53. S.S. Ghadikolaei , Kh. Hosseinzadeh , Mohammad Hatami , D.D. Ganji , M. Armin , Investigation for squeezing flow of ethylene glycol (C2H6O2) carbon nanotubes (CNTs) in rotating stretching channel with nonlinear thermal radiation, Journal of Molecular Liquids, Volume (263), No (263), Year (2018-8), Pages (10-21)
  54. Mohammad Hatami , S. Mohammadi-Rezaei , M.Tahari , D. Jing , Recent developments in magneto-hydrodynamic Fe3O4 nanofluids for different molecular applications: A review study, Journal of Molecular Liquids, Volume (250), No (250), Year (2018-1), Pages (244-258)
  55. Mehdi Neyestani , Mohammad Hatami , Sadegh Hesari , Combined heat and power economic dispatch problem using advanced modified particle swarm optimization, Journal of Renewable and Sustainable Energy, Volume (11), No (1), Year (2019-1), Pages (15302-15302)
  56. Mohammad Hatami , S. Mosayebidorcheh , D. Jing , Peristaltic flow and heat transfer of nanofluids in a sinusoidal wall channel: two-phase analytical study, Journal of Analysis, Volume (27), No (3), Year (2019-9), Pages (913-929)
  57. Mohammad Hatami , A. Kheirkhah , H. Ghanbari-Rad , Dengwei Jing , Numerical heat transfer enhancement using different nanofluids flow through venturi and wavy tubes, Case Studies in Thermal Engineering, Volume (13), No (13), Year (2019-3), Pages (100368-100368)
  58. Mehdi Neyestani , Sadegh Hesari , Mohammad Hatami , Planned production of thermal units for reducing the emissions and costs using the improved NSGA II method, Case Studies in Thermal Engineering, Volume (13), No (13), Year (2019-3), Pages (100397-100397)
  59. M. Tahari , B. Luo , J. Geng , D. Jing , Mohammad Hatami , Optimization of Thermal Spray Parameters of NiAl/Cr2C3 Coating by Taguchi Method, Solid State Phenomena, Volume (295), No (295), Year (2019-8), Pages (9-14)
  60. D. R. V. S. R. K. Sastry , Peri K. Kameswaran , Mohammad Hatami , MHD and Viscous Dissipation Effects in Marangoni Mixed Flow of a Nanofluid over an Inclined Plate in the Presence of Ohmic Heating, Fluid Dynamics and Materiald Processing, Volume (17), No (2), Year (2021-1), Pages (285-300)
  61. Hameed K. Hamzah , Farooq H. Ali , Mohammad Hatami , D. Jing , Mohammed Y. Jabbar , Magnetic nanofluid behavior including an immersed rotating conductive cylinder: finite element analysis, Scientific Reports, Volume (11), No (1), Year (2021-2)
  62. M.E. Nakhchi , Mohammad Hatami , M. Rahmati , A numerical study on the effects of nanoparticles and stair fins on performance improvement of phase change thermal energy storages, Energy, Volume (215), No (215), Year (2021-1), Pages (119112-119112)
  63. Hadi Behzadnia , Hui Jin , mahyar najafian , Mohammad Hatami , Geometry optimization for a rectangular corrugated tube in supercritical water reactors (SCWRs) using alumina-water nanofluid as coolant, Energy, Volume (221), No (221), Year (2021-4), Pages (119850-119850)
  64. S.E. Ghasemi , Mohammad Hatami , Solar radiation effects on MHD stagnation point flow and heat transfer of a nanofluid over a stretching sheet, Case Studies in Thermal Engineering, Volume (25), No (25), Year (2021-6), Pages (100898-100898)
  65. Mohammad Hatami , D. Jing , Peristaltic Carreau-Yasuda nanofluid flow and mixed heat transfer analysis in an asymmetric vertical and tapered wavy wall channel, Reports in Mechanical Engineering, Volume (1), No (1), Year (2020-12), Pages (128-140)
  66. Mohammad Hatami , Md. Jashim Uddin , Meibing Hu , Dengwei Jing , Maryiam Javed , Two‐phase natural convection analysis and hybrid nanoparticle migration around micromixer blades, Heat Transfer, Volume (49), No (5), Year (2020-7), Pages (3044-3065)
  67. Mohammad Hatami , Maryam Hasanpour , Dengwei Jing , Recent developments of nanoparticles additives to the consumables liquids in internal combustion engines: Part I: Nano-fuels, Journal of Molecular Liquids, Volume (318), No (318), Year (2020-11), Pages (114250-114250)
  68. Maryam Hasanpour , Mohammad Hatami , Photocatalytic performance of aerogels for organic dyes removal from wastewaters: Review study, Journal of Molecular Liquids, Volume (309), No (309), Year (2020-7), Pages (113094-113094)
  69. M.E. Nakhchi , Mohammad Hatami , M. Rahmati , Experimental investigation of heat transfer enhancement of a heat exchanger tube equipped with double-cut twisted tapes, Applied Thermal Engineering, Volume (180), No (180), Year (2020-11), Pages (115863-115863)
  70. Mohammad Hatami , Farooq Hassan Ali , Ammar I. Alsabery , Songwei Hu1 , D. Jing , Hameed K. Hamzah3 , MIXED CONVECTION HEAT TRANSFER OF SIO2-WATER AND ALUMINA-PAO NANO-LUBRICANTS USED IN A MECHANICAL BALL BEARING, Journal of Thermal Engineering, Volume (7), No (2), Year (2021-2), Pages (134-161)
  71. Mohammad Hatami , S. Mosayebidorcheh , M. Vatani , T. Mosayebidorcheh , D.D. Ganji , DIFFERENTIAL TRANSFORMATION METHOD FOR ANALYSIS OF NONLINEAR FLOW AND MASS TRANSFER THROUGH A CHANNEL FILLED WITH A POROUS MEDIUM, Journal of Thermal Engineering, Volume (6), No (2), Year (2020-4), Pages (24-40)
  72. Mohammad Hatami , Lijun Sun , D. Jing , H. Gunerhan , Peri K. Kameswaran , Rotating Cylinder Turbulator Effect on the Heat Transfer of a ‎Nanofluid Flow in a Wavy Divergent Channel‎, Journal of Applied and Computational Mechanics, Year (2020-8)
  73. Hameed K. Hamzah , Farooq H. Ali , Mohammad Hatami , D. Jing , Effect of Two Baffles on MHD Natural Convection in U-Shape ‎Superposed by Solid Nanoparticle having Different Shapes, Journal of Applied and Computational Mechanics, Volume (6), No (6), Year (2020-12), Pages (1200-1209)
  74. H. Safari , Mohammad Hatami , Taguchi parametric study on the radial and tangential cutting forces in Dry High Speed Machining (DHSM), Metallurgical and Materials Engineering, Volume (26), No (3), Year (2020-9), Pages (303-316)
  75. Mohammad Hatami , Maryam Hasanpour , Dengwei Jing , Recent developments of nanoparticles additives to the consumables liquids in internal combustion engines: Part III: Nano-coolants, Journal of Molecular Liquids, Volume (319), No (319), Year (2020-12), Pages (114131-114131)
  76. M. Javed , T. Iqbal , A.I. Rao , Mohammad Hatami , Utilization of Herschal-Bulkley fluid in an inclined compliant channel, International Communication in Heat and Mass Transfer, Volume (116), No (116), Year (2020-7), Pages (104594-104594)
  77. Mohammad Hatami , Maryam Hasanpour , Dengwei Jing , Recent developments of nanoparticles additives to the consumables liquids in internal combustion engines: Part II: Nano-lubricants, Journal of Molecular Liquids, Volume (319), No (319), Year (2020-12), Pages (114156-114156)
  78. Maryam Hasanpour , Mohammad Hatami , Application of three dimensional porous aerogels as adsorbent for removal of heavy metal ions from water/wastewater: A review study, Advances in Colloid and Interface Science, Volume (284), No (284), Year (2020-10), Pages (102247-102247)

مقالات ارایه شده در کنفرانس