نمایش نتایج جستجو برای
کلمات کلیدی: composite
موارد یافت شده: 235
1 - Three-dimensional interlaminar stress analysis at free edges of general cross-ply composite laminates (چکیده)2 - Free edge stress analysis of general cross-ply composite laminates under extension and thermal loading (چکیده)
3 - Accurate Determination of Interlaminar Stresses in General Cross-Ply Laminates (چکیده)
4 - Deformation and Stress Analysis of Circumferentially Fiber-Reinforced Composite Disks (چکیده)
5 - Three-Dimensional Stress Analysis of Rotating Composite Beams Due to Material Discontinuities (چکیده)
6 - Influence of nano sized silicon carbide on dimensional stability of Al/SiC nanocomposite (چکیده)
7 - Analysis of Laminated Composite Beams Using Layerwise Displacement Theories (چکیده)
8 - Influence of filler particles on deformation and fracture mechanism of isotactic polypropylene (چکیده)
9 - Dependency of physical and mechanical properties of mechanical alloyed Al–Al2O3 composite on milling time (چکیده)
10 - Effect of Both Uncoated and Coated Calcium Carbonate on Fracture Toughness of HDPE/CaCO3 Nanocomposites (چکیده)
11 - A study on thermal behaviour of HDPE/CaCO3 nanocomposites (چکیده)
12 - Synthesis of Al-Al2O3 Nano-Composite by Mechanical Alloying and Evaluation of the Effect of Ball Milling Time on the Microstructure and Mechanical Properties (چکیده)
13 - investigation of deformation mechanism in polyproylene/Glass fober Composite (چکیده)
14 - the influence of glass fider on fracture behavior of isotactic polypropylene (چکیده)
15 - Edge effects of uniformly loaded cross - ply composite laminates (چکیده)
16 - Stress analysis of perforated composite plates (چکیده)
17 - On the strain rate sensitivity of HDPE/CaCO3 nanocomposites (چکیده)
18 - Stress Analysis of Composite Plates with Non-circular Cutout (چکیده)
19 - Buckling of Perforated Plates Repaired with Composite Patches (چکیده)
20 - The effects of volume percent and aspect ratio of carbon fiber on fracture toughness of reinforced aluminum matrix composites (چکیده)
21 - Combustion Wave Stability in Diluted TiO2/Al/C system in Atmospheric Air (چکیده)
22 - Analysis of Interlaminar Stresses in General Cross-Ply Composite Plates Subjected to Free Vibration (چکیده)
23 - Multi-Objective Optimal Design of Sandwich Composite Laminates Using Simulated Annealing and FEM (چکیده)
24 - Analytical Determination of Free Edge Stresses in Composite Laminates with Piezoelectric Material Properties (چکیده)
25 - Ant Colony Optimization Applied to Discrete and Continuous Structural Problems (چکیده)
26 - Optimal Design of Sandwitch Composite Laminates for Minimum Cost and Maximum Frequency Using Simulated Annealing (چکیده)
27 - Genetic Algorithm for Multi-Objective Optimal Design of Sandwich Composite Laminates with Minimum Cost and Maximum Frequency (چکیده)
28 - Analytical Stress Analysis of Rotating Beam Due to Material Discontinuities (چکیده)
29 - Non-Linear Analysis of Interlaminar Stresses in Composite (چکیده)
30 - A Study On The Role Of Multi Wall Carbon Nano Nanotube On Tensile Properties Of Epoxy Nanocomposite (چکیده)
31 - Synthesis of Al-Al2O3 Nano-Composite by Mechanical Alloying and Evaluation of the Effect of Ball Milling Time on the Microstructure and Mechanical Properties (چکیده)
32 - Identifying Fracture parameters of polymer composites (چکیده)
33 - The Effect of Milling Conditions on Morphology and Grain Size of Al/SiC Nanocomposite Powders Produced by Mechanical Alloying Method (چکیده)
34 - A new method for fabrication of TiC-Al2O3 composite using nano-size TiO2 (چکیده)
35 - Fabrication of NiO/SiO2 nanocomposites using sol–gel method and optimization of gelation time using Taguchi robust design method (چکیده)
36 - crystallinity behavior of MDPE-clay nanocomposites fabricated using ball milling method (چکیده)
37 - Study the morphology and granulometry of polyethylene-clay nanocomposite powders (چکیده)
38 - prediction of Al-B4C nanocomposite powder particle size distribution bu nueral network modeling (چکیده)
39 - Linear and Non-linear Analyses of Functionally Graded Plates Using Generalized Differential Quadrature Method (چکیده)
40 - Investigation the Impact Response of Fiber Reinforced Composites with a Hole (چکیده)
41 - Microwave-combustion synthesize of Al2O3/TiC Composite (چکیده)
42 - AN ANALYTICAL SOLUTION FOR BENDING AND VIBRTION ANALYSIS OF TAPERED COMPOSITE BEAMS (چکیده)
43 - Application of Statistical Design for the Optimization of Amino Acid Separation by reverse-phase HPLC (چکیده)
44 - On role of stearic acid on morphology ofA-Sic composite powders produced bymechanical aloying methodl (چکیده)
45 - Synthesis of PE-Cu-C Nano-Crystalline Composite by Mechanochemical Technique (چکیده)
46 - Effect of both nano-sized alumina particles and severe deformation on polyethylene crystallinity index (چکیده)
47 - A study on the effect of synthesis parameters on the size of nickel particles in sol–gel derived Ni–SiO2–Al2O3 nanocomposites (چکیده)
48 - Low velocity impact analysis of laminated composite plates using a 3D elasticity based layerwise FEM (چکیده)
49 - A study on curing and thermal behavior of Cyanoacrylate/SiO2 Nanocomposite (چکیده)
50 - Analytical solutions for bending analysis of rectangular laminated plates with arbitrary lamination and boundary conditions (چکیده)
51 - Structural Similitude for Vibration of Delaminated Composite Beam-Plates (چکیده)
52 - Crystallinty behavior of MDPE-clay nanocomposites fabricated using ball milling method (چکیده)
53 - On the role of nano-size SiC on lattice strain and grain size of Al/SiC nanocomposite (چکیده)
54 - Static Analysis of Antisymmetric Cross-Ply Thick Laminated Plates Using a Layerwise Theory: The Lévy-Type Solution (چکیده)
55 - Innovative processing of porous copper composite by chemical reaction (چکیده)
56 - A study of copper composite foam produced by SHS (چکیده)
57 - Optimizing the ignition behavior of microwave-combustion synthesizedAl2O3/TiC composite using Taguchi robust design method (چکیده)
58 - An assessment of the process of Self-propagating High-Temperature Synthesisfor the fabrication of porous copper composite (چکیده)
59 - Influence of Nano-Size Al2O3 Weight Percent on the Microstructure and Mechanical Properties of Al-Matrix Nanocomposite (چکیده)
60 - Preparation of imide-siloxane/silica nanocomposite membrane (چکیده)
61 - Preparation and characterization of lmide-siloxane/silica Nanocomposite Films (چکیده)
62 - Application and implication of nanotechnology in food processing (چکیده)
63 - Study of the Morphology and Granulometry ofPolyethylene–Clay Nanocomposite Powders (چکیده)
64 - Effect of Milling Time and Clay Content on the Thermal Stability of Polyethylene-Clay Nanocomposite (چکیده)
65 - Structural Similitude between Vibration Response and Flutter Boundary of Cross Ply Composite Plates (چکیده)
66 - Influence of H and N insertion on the magnetostriction and thermal expansion of YFe10V2Zx (Z=N, H) compositions (چکیده)
67 - Structural Similitude for Vibration of Delaminated Composite Beam-Plates (چکیده)
68 - Effect of Partial Debonding on Response of Perforated Plates Repairedwith Square Composite Patches (چکیده)
69 - Flutter of Perforated Metallic Plates Repaired with Cross-Ply Composite Patches (چکیده)
70 - Shear Buckling of Perforated Metallic Plates Reinforced with Square Composite Patches (چکیده)
71 - Flutter of Perforated Metallic Plates Repaired with Angle-ply Composite Patches (چکیده)
72 - Effects of Multiwall Carbon Nanotubes on the Thermal and Mechanical Properties of Medium Density Polyethylene Matrix Nanocomposites Produced by a Mechanical Milling Method (چکیده)
73 - Distribution Effect of Nanostructure Reinforcement in Al/Ni Aluminides Composite on Homogenization and Mechanical Properties (چکیده)
74 - Role of nano-size TiO2 particles on the crystallite size of microwave—Combustion synthesized Al2O3/TiC composite (چکیده)
75 - Incorporating Aspect Ratio in a New Modeling Approach for Strengthening of MMCs and its Extension from Micro to Nano Scale (چکیده)
76 - Role of Nano-Size SiO2 Additive on the Thermal Behavior of Cyanoacrylate Nanocomposite (چکیده)
77 - Synthesis and Characterization of Nanoparticles and Nanocomposite of ZnO and MgO by Sonochemical Method and their Application for Zinc Polycarboxylate Dental Cement Preparation (چکیده)
78 - Effect of nano-size calcium carbonate on short-term creep of polyethylene nanocomposite (چکیده)
79 - Effect of nano size TiO2 on morphology of Polyurethane/TiO2 nanocomposites (چکیده)
80 - Stress Analysis of Composite Plates with a Quasi-Square Cutout Subjected to Uniaxial Tension (چکیده)
81 - Role of Surface Active Agent on Dimensional Stability of HDPE/CaCO3 Nanocomposites (چکیده)
82 - Synthesis of alumina reinforced nanostructured -brass by mechanochemical (چکیده)
83 - Thermal Behavior Prediction of MDPE Nanocomposite/Cloisite Na+ Using Artificial Neural Network and Neuro-Fuzzy Tools (چکیده)
84 - Effect of MMT Clay Content on Thermal Behavior of MDPE-MMT Nanocomposite (چکیده)
85 - Free Vibration Analysis of Moderately Thick Rectangular Laminated Composite Plates with Arbitrary Boundary Conditions (چکیده)
86 - Feasibility study of porous Fe-Al2O3 composite fabrication through combination of SPS and SHS processes (چکیده)
87 - A Study on the fracture behavior of polyethylene/calcium carbonate nanocomposites using the essential work of fracture (EWF) method (چکیده)
88 - Transient Analysis of Rectangular Laminated Plates Subjected to Dynamic Transverse Loading Using a Layerwise Theory (چکیده)
89 - A Compact MIM Zeroth Order Resonator Antenna (چکیده)
90 - The effect of adding enzyme-modified cheese on sensory and texture properties of low- and high-fat cream cheeses (چکیده)
91 - Effect Of Ethylene–propylene Rubber Content On Tensile And Fracture Properties Of Polyamid (چکیده)
92 - Synthesis, characterization and antimicrobial properties of Cu/ZnO composite nanoparticles (چکیده)
93 - One-step fabrication of Cu–Al2O3 nanocomposite via solution combustion synthesis route (چکیده)
94 - Structural similitude for flutter of delaminated composite beam-plates (چکیده)
95 - Similitude requirements and scaling laws for flutter prediction of angle-ply composite plates (چکیده)
96 - Structural Similitude between Vibration Response and Flutter Boundary of Cross Ply Composite Plates (چکیده)
97 - An Exact Formulation for Dual-band Composite Right/Left Handed Transmission Line Design (چکیده)
98 - Effect of Synthesis Parameters on Structural Characteristics of Polysulfone Membrane and its Gas Separation Properties (چکیده)
99 - Synthesis and Characterization of Novel Modified SBA-15/PSF Nanocomposite Membrane Coated by PDMS for Gas Separation (چکیده)
100 - A Study on Fracture Mechanism of SiO2/Cyanoacrylate Nanocomposites (چکیده)
101 - CO2 separation using PDMS- ZSM5 zeolite composite membrane (چکیده)
102 - Gas separation properties of polyether-based polyurethane–silica nanocomposite membranes (چکیده)
103 - DEFORMATION MECHANISM OF POLYETHYLENE/CALCIUM CARBONATE NANOCOMPOSITES (چکیده)
104 - Formation of metal matrix composite reinforced withNano sized Al2O3 + Ni-Al intermetallics during coating of Al substrate via Combustion synthesis (چکیده)
105 - Investigation and Optimization of Sn/Gr Lubricants Effects on Cold Extrudability of Fe-TiC Nanocomposite Using Taguchi Robust Design Method (چکیده)
106 - Sono-synthesis of core-shell nanocrystal (CdS-TiO2) without surfactant (چکیده)
107 - PREPARATION OF AL2O3/CU CORE–SHELL STRUCTURAL COMPOSITES BY ELECTROLESS PLATING AND DETERMINATION OF OPTIMUM BATH COMPOSITION USING TAGUCHI EXPERIMENTAL DESIGN (چکیده)
108 - MICROSTRUCTURE EVOLUTION OF AL–AL2O3 MICRO AND NANO COMPOSITES FABRICATED BY A MODIFIED STIR CASTING ROUTE (چکیده)
109 - Fabrication or preparation and characterization of new modified MCM-41/PSf nanocomposite membrane coated by PDMS (چکیده)
110 - Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 Composites fabricated by stir and compo-casting processes (چکیده)
111 - Effect of both nano-size alumina particles and severe deformation on polyethylene crystallinity index (چکیده)
112 - Microstructure and Mechanical Properties of Al–Al2O3 Micro and Nano Composites fabricated by Stir casting (چکیده)
113 - Structural and luminescence properties of CaF2 nanoparticle synthesis by hydrothermal method, and synthesis polymer-nanoparticle composite (چکیده)
114 - A non-linear two-phase model for reinforced soils (چکیده)
115 - Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compocasting method and study of its properties (چکیده)
116 - Exceptional catalytic efficiency in mineralization of the reactive textile azo dye (RB5) by a combination of ultrasound and core–shell nanoparticles (CdS/TiO2) (چکیده)
117 - Evaluation of Characteristics of Interfacial Phases Produced in Al/Ni3Al Composite during Manufacturing (چکیده)
118 - PREPARATION OF AL2O3/CU NANOCOMPOSITE POWDER BY ELECTROLESS PLATING AND SUBSEQUENTLY SINTERING (چکیده)
119 - Microstructure and mechanical properties of Al/Al2O3 micro and nano nanocomposites fabricated by a novel stirr casting (چکیده)
120 - A Study on the Scratch Behaviour of Acrylic/Detonation Nanodiamond Nanocomposite (چکیده)
121 - Polymer Nanocomposite of Silver-Tin Dioxide Core-Shell Nanoparticles/PVA - Structural Investigation (چکیده)
122 - APPLYING DYNAMIC RELAXATION METHOD IN BENDING ANALAYSIS OF MULTILAYER COMPOSITE PLATES WITH DIFFERENT GEOMETRICAL CIRCULAR SHAPES (چکیده)
123 - Mechanochemical synthesis and characterization of FeNi-Al2O3 nanocomposites (چکیده)
124 - Fabrication and wear behavior investigation of the carbon/epoxycomposites based on wood using artificial neural networks (چکیده)
125 - Dynamic buckling of perforated metallic cylindrical panels reinforced with composite patches (چکیده)
126 - Gas Separation Performance of Polyvinylchloride - Silica Nanocoposite Polymeric Membrane (چکیده)
127 - Application of Eddy Current Non-destructive Evaluation for Detection of Undesirable Microstructures in the Production of Dual Phase Steels (چکیده)
128 - Experimental Study on the Wrinkling During Deep Drawing of Dual Phase Steels (چکیده)
129 - Influence of Alumina Particles on Thermal Behavior of High Density Polyethylene (HDPE) (چکیده)
130 - Welding of aluminum alloys through thermite like reactions in Al–CuO–Ni system (چکیده)
131 - Interlaminar stresses in thick rectangular laminated plates with arbitrary laminations and boundary conditions under transverse loads (چکیده)
132 - Fabrication of Fe/Al2O3 composite foam via combination of combustion synthesis and spark plasma sintering techniques (چکیده)
133 - Role of fuel/oxidizer on the Cu-Al2O3 Nanocomposite fabricated by the solution combustion synthesis method (چکیده)
134 - FABRICATION AND CHARACTERIZATION OF SILVER-TIN DIOXIDE CORE-SHELL STRUCTURED NANOCOMPOSITE PARTICLES (چکیده)
135 - A new false color composite technique for dust enhancement and point source determination in Middle East (چکیده)
136 - Fabrication of FeNi–Al2O3 nanocomposites and optimization of mechanical properties using Taguchi method (چکیده)
137 - Role of fuel/oxidizer ratio on the synthesis conditions of Cu–Al2O3 nanocomposite prepared through solution combustion synthesis (چکیده)
138 - Delamination detection in laminated composite beams using hybrid elements (چکیده)
139 - Air-exposed combustion synthesis of Al2O3 nanofibers in Al/TiO2/C system (چکیده)
140 - Kinetic investigation on sono-degradation of Reactive Black 5 with core–shell nanocrystal (چکیده)
141 - Separation ofethylene/ethaneandpropylene/propanebycellulose acetate–silicananocompositemembranes (چکیده)
142 - Impact toughness and microstructure of continuous medium carbon steel-bar reinforced cast iron composite (چکیده)
143 - Development in Wear Resistance of Fe-0.7Cr-0.8Mn Milling Balls through In Situ Reinforcing with Low Weight Percent TiC (چکیده)
144 - Synthesis and Studying Optical Properties of PVA/CaF2 Nanocomposite (چکیده)
145 - Fabrication of Aluminum–Graphite Composites by SPS Method (چکیده)
146 - Studying the physical and mechanical behavior of fibre-reinforced epoxy composite, fabricated by VARTM and VB (چکیده)
147 - Acoustic Absorption Behavior of closed-cell Aluminum Foams and sandwich panels (چکیده)
148 - An investigation of production Al-Al2O3 composite foam via SHS (چکیده)
149 - On the role of aluminum powder on production copper foam by turning chips (چکیده)
150 - Ceramic Particles Stabilized Aluminum Foams Produced by Melt Gas Injection (چکیده)
151 - Effects of density on the Bending and compressive properties of closed-cell aluminum foam (چکیده)
152 - On the viscosity of composite suspensions of aluminum and ammonium perchlorate particles dispersed in hydroxyl terminated polybutadiene - new empirical model (چکیده)
153 - Analysis of the sedimentation process in reactive polymeric suspensions (چکیده)
154 - Preparation of ceramic matrix nanocomposites using Ni coated Al2O3 nanoparticles (چکیده)
155 - Analytical solutions for adhesively bonded composite single-lap joints under mechanical loadings using full layerwise theory (چکیده)
156 - A Study on the Role of Nano-TiO2 on the Properties of Starch/ Polyvinyl alcohol Blend Film (چکیده)
157 - Preparation and characterization of dimethyldichlorosilane modified SiO2/PSf nanocomposite membrane (چکیده)
158 - A comparative study on the effect of type of reinforcement on the scratch behavior of a polyacrylic-based nanocomposite coating (چکیده)
159 - Preparation and characterization of a composite PDMS membrane on CA support (چکیده)
160 - Synthesis, characterization and study of optical properties of polyvinyl alcohol/CaF2 nanocomposite films (چکیده)
161 - Amperometric glucose biosensor based on adsorption of glucose oxidase at Fe3O4-Chitosan nanocomposite FTO glass plate (چکیده)
162 - Eddy current nondestructive evaluation of dual phase steel (چکیده)
163 - A review of homogenization and topology opimization II—analytical and numerical solution of homogenization equations (چکیده)
164 - Non-linear analysis of fiber-reinforced open conical shell panels considering variation of thickness and fiber orientation under thermo-mechanical loadings (چکیده)
165 - Analytical solution for bending problem of moderately thick composite annular sector plates with general boundary conditions and loadings using multi-term extended Kantorovich method (چکیده)
166 - Role of Nano-Sized TiO2 on Mechanical and Thermal Behavior of Starch/Poly (vinyl alcohol) Blend Films (چکیده)
167 - Effect of Heat Treatment of Nanodiamonds on the Scratch Behavior of Polyacrylic/Nanodiamond Nanocomposite Clear Coats (چکیده)
168 - Shear bond strength and antibacterial effects of orthodontic composite containing TiO2 nanoparticles (چکیده)
169 - Microstructure and mechanical properties of extruded Al/Al2O3 composites fabricated by stir-casting process (چکیده)
170 - Exact solution of conductive heat transfer in cylindrical composite laminate (چکیده)
171 - Complete mineralization of surfactant from aqueous solution by a novel sono-synthesized nanocomposite (TiO2–Cu2O) under sunlight irradiation (چکیده)
172 - A bending element for isotropic, multilayered and piezoelectric plates (چکیده)
173 - Preparation, characterization and gas permeation study of PSf/MgO Nanocomposite Membrane (چکیده)
174 - Synthesis and application of FePt/CNTs nanocomposite as a sensor and novel amide ligand as a mediator for simultaneous determination of glutathione, nicotinamide adenine dinucleotide and tryptophan (چکیده)
175 - Applicability of small-scale models in prediction flutter pressure of delaminated composite beam-plates (چکیده)
176 - Elastic wave propagation in a functionally graded nanocomposite reinforced by carbon nanotubes employing meshless Local Integral Equations (LIEs) (چکیده)
177 - Development of a novel thin film composite membrane by Interfacial polymerization on polyetherimide/ modified SiO2 support for organic solvent nanofiltration (چکیده)
178 - Free-edge stress analysis of general rectangular composite laminates under bending, torsion and thermal loads (چکیده)
179 - A simple sterategy for improving mechanical characterisitcs of carbon nanotube-epoxy composite through functionalization of carbon nanotubes by epoxy chains (چکیده)
180 - Enhancement of mechanical properties of amine-functionalized mwcnt/epoxy composites: effect of amine moieties (چکیده)
181 - Influence of Strain Rate on the Toughening Effect of CaCO3 in Polypropylene/CaCO3 Composites (چکیده)
182 - Instability of cracked CFRP composite cylindrical shells under combined loading (چکیده)
183 - Nanocomposite Catalysts Obtaining by Mechanochemical Technique for Synthesizing Carbon Nanotubes (چکیده)
184 - Fabrication of Aluminium-Carbon nanotube Composites Via Spark Plasma Sintering Method (چکیده)
185 - Investigation of microstructure and mechanical properties of Al6061-nanocomposite fabricated by stir casting (چکیده)
186 - Evaluation of process behavior and crystallite specifications of mechano-chemically synthesized WC–Al2O3 nano-compositesEvaluation of process behavior and crystallite specifications of mechano-chemically synthesized WC–Al2O3 nano-composites (چکیده)
187 - Exact Solution of Unsteady Conductive Heat Transfer in Cylindrical Composite Laminates (چکیده)
188 - Forced Vibration Analysis of Cross-Ply Laminated Plates Using a Layerwise Theory (چکیده)
189 - Application of a Hybrid Mesh-free Method Based on Generalized Finite Difference (GFD) Method for Natural Frequency Analysis of Functionally Graded Nanocomposite Cylinders Reinforced by Carbon Nanotubes (چکیده)
190 - Two-fold enhancement in tensile strength of carbon nanotube–carbon fiber hybrid epoxy composites through combination of electrophoretic deposition and alternating electric field (چکیده)
191 - Analytical Solutions of Stress Field in Adhesively Bonded Composite Single-lap Joints under Mechanical Loadings (چکیده)
192 - Synthesis and characterisation of dental composite materials reinforced with fluoroapatite–mullite glass–ceramic particles (چکیده)
193 - Biomimetic synthesis and mechanical properties of hydroxyapatite/poly (vinyl alcohol) nanocomposites (چکیده)
194 - Adsorption of Ni (ii) from aqueous solutions using graphene nanosheets and graphene-zinc oxide nanocomposite: thermodynamic and kinetic studies (چکیده)
195 - Biodegradable Starch/Poly (vinyl alcohol) Film Reinforced with TiO2 Nanoparticles (چکیده)
196 - An Exact Formulation for Dual-Band Composite Right/Left-Handed Transmission Line Design (چکیده)
197 - Exceptional Removal of Phosphate Ions by Sono-synthesized Nanocomposite of Fe3O4-La2 O (CO3)2 (چکیده)
198 - THE EFFECT of THE AMOUNT of 3-METIRACRYLOXYPROPYLTRIMETHOXYSILANE ON CREATING LINKS BETWEEN RESIN MATRIX ANِD SYNTHESYZED APATITE GLASS CERAMIC POWDER WITHIN DENTAL RESIN COMPOSITES (چکیده)
199 - A Compact MIM Zeroth Order Resonator Antenna (چکیده)
200 - An augmented NSGA-II technique with virtual database to solve the composite generation and transmission expansion planning problem (چکیده)
201 - Circuit breakers maintenance planning for composite power systems (چکیده)
202 - Fabrication and Characterization of Silver-Tin Dioxide Core-Shell Structured Nanocomposite Particles (چکیده)
203 - Optimization of preparation conditions of polyamide thin film composite membrane for organic solvent nanofiltration (چکیده)
204 - Fabrication of multi-walled carbon nanotube–carbon fiber hybrid material via electrophoretic deposition followed by pyrolysis process (چکیده)
205 - Synthesis and characterization of permalloy-reinforced Al2O3 nanocomposite powders by mechanical alloying (چکیده)
206 - Preparation and characterization of UZM-5/polyamide thin film nanocomposite membrane fo rdewaxing solvent recovery (چکیده)
207 - Removal of mercury from aqueous media using polypyrrole/ SBA- 15 nanocomposite (چکیده)
208 - Microstructural analysis and mechanical properties of aluminum matrix nanocomposites reinforced with uncoated and Cu-coated alumina particles (چکیده)
209 - A HMSIW Circularly Polarized Leaky-Wave Antenna With Backward, Broadside, and Forward Radiation (چکیده)
210 - Improvements in fatigue life of amine-functionalized carbon nanotube-reinforced epoxy composites: effect of microwave-assisted procuring (چکیده)
211 - An investigation of the tensile and compressive properties of Al6061 and its nanocomposites in as-cast state and in extruded condition (چکیده)
212 - An investigation on microstructure properties of Al6061/Al2O3 nanocomposite in as-cast state and in extruded condition (چکیده)
213 - Fractography of Al6061/Al2O3 nanocomposites fabricated by stir-casting process (چکیده)
214 - Investigation of Microstructure and Mechanical Properties of Al/nanoAl2O3 Composites fabricated by ARB process (چکیده)
215 - Improvements in mechanical properties of multi-walled carbon nanotube-reinforced epoxy composites through novel magnetic-assisted method for alignment of carbon nanotubes (چکیده)
216 - Nonuniform deformation and curvature identification of ionic polymer metal composite actuators (چکیده)
217 - Multiwalled carbon nanotubes/polypyrrole/SiO2 composite prepared by electrodeposition technique as a new solid phase microextraction sorbent for preconcentrationon of BTEX (چکیده)
218 - Electropolymerized polypyrrole/multiwalled carbon nanotubes/TiO2 composite on stainless steel wire for solid-phase microextraction of BTEX coupled to GC-FID (چکیده)
219 - Improvements in fatigue life of amine-functionalized multi-walled carbon nanotube-reinforced epoxy composites: Effect of functionalization degree and microwave-assisted precuring (چکیده)
220 - An Investigation of Tribological Properties of Al-Al2O3 Composites Fabricated by Spark Plasma Sintering Method (چکیده)
221 - Microstructure and hardness evaluation of Al-SiO2nanocomposites produced with ultrasonic technique (چکیده)
222 - Investigation of nano-SiO2 impact on mechanical and biocompatibility properties of cyanoacryalate based nanocomposites for dental application (چکیده)
223 - Non-isothermal crystallization kinetics of polyethylene–clay nanocomposites prepared by high-energy ball milling (چکیده)
224 - A study on the mechanical properties of Sn/Ag composite fabricated by Accumulative Roll Bonding (ARB) process (چکیده)
225 - New polypyrrole–carbon nanotubes–silicon dioxide solid-phase microextraction fiber for the preconcentration and determination of benzene, toluene, ethylbenzene, and o-xylene using gas liquid chromatography (چکیده)
226 - Deep-drawing of thermoplastic metal-composite structures: Experimental investigations, statistical analyses and finite element modeling (چکیده)
227 - سنتز و بررسی خواص ضد باکتری نانو کامپوزیت اکسید تیتانیمTiO2 (چکیده)
228 - Antibacterial properties of Mg (1-x ) Ag (x) O (x=0.03) nanocomposite (چکیده)
229 - Pt catalysts on PANI coated WC/C nanocomposites for methanol electro-oxidation and oxygen electro-reduction in DMFC (چکیده)
230 - Elastic wave propagation and time history analysis in FG nanocomposite cylinders reinforced by carbon nanotubes using a hybrid mesh-free method (چکیده)
231 - Effect of Milling Time and Clay Content on the Thermal Stability of Polyethylene-clay Nanocomposite (چکیده)
232 - Application of magnetic polymeric nancomposite for preconcentration and simultaneous spectrophotometric determination of dye pollutants in water by multivariate chemometrics method (چکیده)
233 - Antibacterial properties of Mg(1-x)Ag(x) O (x = 0.03)nanocomposite (چکیده)
234 - A Novel Model for Smart Grid as a Network of Networks with Hybrid Composite Cross Layer Description (چکیده)
235 - Adsorption of Doxorubicin Anti Cancer Drug on the Magnetic Silica Core Shell Nanocomposite (چکیده)
