مقالات ارائه شده در مجلات

فارسی

  1. رضا ناصری , مهران کدخدایان , محمود شریعتی , تحلیل تئوری فرآیند ایکپ به روش کران بالا و بررسی تجربی آن در وضعیت مقطع دایروی کانال, مهندسی مکانیک امیرکبیر, دوره (53), شماره (8), سال (2022-9), صفحات (4729-4744)
  2. رضا ناصری , مهران کدخدایان , محمود شریعتی , بررسی برگشت فنری تیتانیم خالص تجاری فوق ریزدانه در آزمون خمکاری سه نقطه ای, مهندسی مکانیک مدرس, دوره (16), شماره (11), سال (2017-2), صفحات (266-276)
  3. اسماعیل عشقی , مهران کدخدایان , شکل‌دهی الکترومغناطیس ورق با استفاده از شکل‌دهی به روی پانچ به جای شکل‌دهی به درون قالب, مکانیک سازه ها و شاره ها-Journal of Solid and Fluid Mechanics, دوره (6), شماره (1), سال (2016-9), صفحات (29-42)
  4. سعید امیرنژاد آروق , مهران کدخدایان , مطالعه تجربی- عددی خمش پذیری درکامپوزیت فلز- الیاف شیشه به منظور کاهش عیوب ناشی از فرایند, مهندسی مکانیک امیرکبیر, دوره (47), شماره (2), سال (2016-1), صفحات (11-20)
  5. رضا ناصری , محمود شریعتی , مهران کدخدایان , اثر سطح مقطع قطعه کار بر خواص مکانیکی تیتانیم خالص تجاری تولید شده به روش پرس کاری در کانال های هم مقطع, فنی مهندسی مدرس, دوره (15), شماره (6), سال (2015-9), صفحات (157-166)
  6. سیدعلی گله داری , مهران کدخدایان , سعید حدیدی مود , بررسی تحلیلی، عددی و تجربی جذب انرژی سازه لانه زنبوری مدرج تحت بارگذاری صفحهای ضربهای با سرعت کم, فنی مهندسی مدرس, دوره (14), شماره (16), سال (2014-4), صفحات (261-271)
  7. حسن ظفرمند , مهران کدخدایان , بررسی سه بعدی دینامیکی و انتشار موج تنش در صفحات ضخیم مدرج تابعی در برابر بار فشاری ناشی از ضربه, فنی مهندسی مدرس, دوره (14), شماره (11), سال (2015-2), صفحات (89-96)
  8. مهران کدخدایان , مهدی معارف دوست , تحلیل کمانش الاستوپلاستیک صفحات مستطیلی به کمک تئوریهای پلاستیسیته تغییرشکل و نموی, مهندسی مکانیک ایران-Iranian Journal of Mechanical Engineering Transactions of the ISME, دوره (15), شماره (1), سال (2013-4), صفحات (36-81)
  9. مهدی معارف دوست , مهران کدخدایان , مقایسه تئوریهای تغییرشکل و نموی در تحلیل کمانش الاستوپلاستیک صفحات نازک مستطیلی به کمک روش یک چهارم تفاضلی تعمیم یافته, مهندسی مکانیک مدرس, دوره (12), شماره (3), سال (2012-9), صفحات (11-26)
  10. مهران کدخدایان , احمد عرفانی مقدم , مهدی حیدری , طراحی مسیرهای بهینه بارگذاری در فرآیند هیدروفرمینگ با استفاده از روش طرح آزمایشها و الگوریتم تبرید تدریجی, مهندسی مکانیک ایران-Iranian Journal of Mechanical Engineering Transactions of the ISME, دوره (22), شماره (1), سال (2011-4), صفحات (85-107)
  11. مهران کدخدایان , احمد عرفانی مقدم , طراحی مسیرهای بهینه بارگذاری در فرآیند هیدروفرمینگ T شکل با اعمال مسیر فشار نوسانی, روش های عددی در مهندسی, دوره (29), شماره (2), سال (2011-2), صفحات (1-10)
  12. مهران کدخدایان , ریحانه اکبری , بررسی نقش ضریب اصطکاک و نیروی نگهدارنده در فرآیند بازگشت فنری در خمش U شکل ورقهای غیر ایزوتروپ, علوم کاربردی و محاسباتی در مکانیک, دوره (1), شماره (1), سال (2010-3), صفحات (115-127)
  13. فرزاد مؤیدیّان , مهران کدخدایان , مطالعه تحلیلی چروکیدگی الاستیک لبه صفحات گرد در فرآیند کشش عمیق, مهندسی مکانیک مجلسی, دوره (2), شماره (2), سال (2010-2), صفحات (17-23)
  14. مهران کدخدایان , جواد مسیبی , بررسی شکل دهی معکوس شونده صفحات نازک با در نظر گرفتن پدیده باشینگر, دانشکده فنی دانشگاه تهران, دوره (43), شماره (1), سال (2009-5), صفحات (65-77)
  15. مهران کدخدایان , محمد اسماعیل گل مکانی , بررسی پدیده برگشت پذیری در فرایند خمشی-کششی U شکل صفحات ناهمسانگرد, مهندسی مکانیک ایران-Iranian Journal of Mechanical Engineering Transactions of the ISME, دوره (10), شماره (2), سال (2008-12), صفحات (111-129)
  16. مهران کدخدایان , گام زمانی بهینه در روش رهایی پویا, Amirkabir-امیرکبیر, دوره (65), سال (2007-3), صفحات (43-51)

انگلیسی

  1. seyed iman shahraini , Mehran Kadkhodayan , Hoda Aslani , Development of GDDR method for ratcheting analysis of moderately thick plates, Engineering Analysis with Boundary Elements, Volume (162), No (162), Year (2024-5), Pages (393-402)
  2. Mehran Kadkhodayan , seyed iman shahraini , A new numerical method for elastic-plastic plate analysis: Theoretical-experimental validation and its application in ratcheting phenomenon, Engineering Analysis with Boundary Elements, Volume (154), Year (2023-9), Pages (64-82)
  3. S Amir Korminejad , ME Golmakani , Mehran Kadkhodayan , Experimental study on the tensile load-carrying capacity of steel/GFRP bonding in moisture and acidic environments at high temperature, Proceedings of the Institution of Mechanical Engineers - Part C, Volume (237), No (8), Year (2023-4), Pages (1926-1940)
  4. Reza Naseri , hamed hiradfar , Mahmoud Shariati , Mehran Kadkhodayan , Corrosion-fatigue resistance of ultrafine grain commercially pure titanium in simulated body fluid, Proceedings of the Institution of Mechanical Engineers, Part E, Volume (237), No (6), Year (2022-11), Pages (2181-2191)
  5. S. Amir Korminejad , M.E. Golmakani , Mehran Kadkhodayan , Experimental and numerical analyses of damaged-steel plate reinforced by CFRP patch in moisture and the acidic environment under tensile test, Structures, Volume (39), Year (2022-5), Pages (543-558)
  6. Sayed Mohammad Kazem Ohab-Yazdi , Mehran Kadkhodayan , Free vibration of bi-directional functionally graded imperfect nanobeams under rotational velocity, Aerospace Science and Technology, Volume (119), No (1), Year (2021-12), Pages (107210-107210)
  7. Sayed Mohammad Kazem Ohab-Yazdi , Mehran Kadkhodayan , Application of Bi-Directional Functionally Graded Material Model for Free Vibration Analysis of Rotating Euler-Bernoulli Nanobeams, Mechanics of Advanced Composite Structures, Volume (8), No (2), Year (2021-12), Pages (389-399)
  8. mohammadali ghasemabadian , Mehran Kadkhodayan , W. Altenhof , Y. Liu , An experimental and numerical study on the crush responses and energy absorption characteristics of single and bi layer cups under low velocity impact, Steel and Composite Structures, Volume (39), No (6), Year (2021-5), Pages (665-683)
  9. seyed iman shahraini , Mehran Kadkhodayan , Ratcheting Analysis of Steel Plate under Cycling Loading using Dynamic Relaxation Method Experimentally Validated, International Journal of Engineering, Volume (34), No (6), Year (2021-6)
  10. S.A. Korminejad , Mehran Kadkhodayan , M.E. Golmakani , Tensile Behavior of Damaged-steel Plate Strengthened by One-sided CFRP Patch in Acidic Environment, Journal of Stress Analysis, Volume (5), No (2), Year (2021-3), Pages (73-82)
  11. Mostafa Esmaeilzadeh , Mohammad Esmaeil Golmakani , Mehran Kadkhodayan , Mohammadreza Amoozgar , Mahdi Bodaghi , Geometrically nonlinear thermohermo-mechanical analysis of grapheneraphene-reinforced moving polymer nanoplates, Advances in Nano Research, Volume (10), No (2), Year (2021-3), Pages (151-163)
  12. Farzad Moyyedian , Mehran Kadkhodayan , Modified Burzynski criterion along with AFR and non-AFR for asymmetric anisotropic materials, Archives of Civil and Mechanical Engineering, Volume (21), No (2), Year (2021-4)
  13. ehsan chabok , Mahmoud Shariati , Mehran Kadkhodayan , Reza Masoudinejad , Fatigue Assessment of 2024-T351 Aluminum Alloy Under Uniaxial Cyclic Loading, Journal of Materials Engineering and Performance, Volume (30), No (4), Year (2021-4), Pages (2864-2875)
  14. sadra ranjbaran , Mehran Kadkhodayan , The Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process, Iranian Journal of Materials Forming, Volume (7), No (2), Year (2020-10), Pages (32-43)
  15. mohammadali ghasemabadian , Mehran Kadkhodayan , William Altenhof , Experimental, numerical, and multi-objective optimization investigations on the energy absorption features of single- and bi-layer deep-drawn cups, Proceedings of the Institution of Mechanical Engineers - Part L, Volume (235), No (3), Year (2021-3), Pages (550-571)
  16. mohammadali ghasemabadian , Mehran Kadkhodayan , Energy Absorption Analysis and Multi-objective Optimization of Tri-layer Cups Subjected to Quasi-static Axial Compressive Loading, International Journal of Engineering, Volume (33), No (4), Year (2020-4)
  17. مصطفی اسماعیل زاده , Mehran Kadkhodayan , S. MOHAMMADI , G. J. TURVEY , Nonlinear dynamic analysis of moving bilayer plates resting on elastic foundations, Journal of Applied Mathematics and Mechanics, Volume (41), No (3), Year (2020-3), Pages (439-458)
  18. mohammadali ghasemabadian , Mehran Kadkhodayan , William Altenhof , M. Bondy , J.Magliaro , An experimental study on the energy absorption characteristics of single- and bi-layer cups under quasi-static loading, International Journal of Crashworthiness, Volume (24), No (3), Year (2019-5), Pages (272-285)
  19. Seyed Ali Galedari , Mehran Kadkhodayan , Collapse of honeycomb cell as a result of buckling or plastic hinges, analytical, numerical and experimental study, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Volume (41), No (3), Year (2019-3)
  20. مصطفی اسماعیل زاده , Mehran Kadkhodayan , Numerical investigation into dynamic behaviors of axially moving functionally graded porous sandwich nanoplates reinforced with graphene platelets, Materials Research Express, Volume (6), No (10), Year (2019-9), Pages (1050-18)
  21. مصطفی اسماعیل زاده , Mehran Kadkhodayan , Dynamic analysis of stiffened bi-directional functionally graded plates with porosities under a moving load by dynamic relaxation method with kinetic damping, Aerospace Science and Technology, Volume (93), Year (2019-10), Pages (105333-105347)
  22. مصطفی اسماعیل زاده , Mehran Kadkhodayan , NONLINEAR DYNAMIC ANALYSIS OF AN AXIALLY MOVING POROUS FG PLATE SUBJECTED TO A LOCAL FORCE WITH KINETIC DYNAMIC RELAXATION METHOD, Computer Methods in Materials Science, Volume (18), No (1), Year (2018-11), Pages (18-28)
  23. Hassan Zafarmand , Mehran Kadkhodayan , Nonlinear material and geometric analysis of thick functionally graded plates with nonlinear strain hardening using nonlinear finite element method, Aerospace Science and Technology, Volume (92), Year (2019-9), Pages (930-944)
  24. F. Moayyedian , Mehran Kadkhodayan , Two New Non-AFR Criteria for Depicting Strength Differential Effect (SDE) in Anisotropic Sheet Metals, Journal of Solid Mechanics, Volume (10), No (1), Year (2018-5), Pages (67-85)
  25. ali rajabi , Mehran Kadkhodayan , Sadegh Ghanei , An investigation into the flexural and drawing behaviors of GFRP-based fiber–metal laminate, Mechanics of Advanced Materials and Structures, Volume (25), No (10), Year (2018-5), Pages (805-812)
  26. Reza Naseri , hamed hiradfar , Mahmoud Shariati , Mehran Kadkhodayan , A comparison of axial fatigue strength of coarse and ultrafine grain commercially pure titanium produced by ECAP, Archives of Civil and Mechanical Engineering, Volume (18), No (3), Year (2018-1), Pages (755-767)
  27. Reza Naseri , Mehran Kadkhodayan , Mahmoud Shariati , Static mechanical properties and ductility of biomedical ultrafine-grained commercially pure titanium produced by ECAP process, Transactions of Nonferrous Metals Society of China, Volume (27), No (9), Year (2017-11), Pages (1964-1975)
  28. mahdi adineh , Mehran Kadkhodayan , Three-dimensional thermo-elastic analysis and dynamic response of a multi-directional functionally graded skew plate on elastic foundation, Composites Part B: Engineering, Volume (125), Year (2017-5), Pages (227-240)
  29. mahdi adineh , Mehran Kadkhodayan , Three-dimensional thermo-elastic analysis of multi-directional functionally graded rectangular plates on elastic foundation, Acta Mechanica, Volume (228), No (3), Year (2017-3), Pages (881-899)
  30. Reza Naseri , Mehran Kadkhodayan , Mahmoud Shariati , An experimental investigation of casing effect on mechanical properties of billet in ECAP process, International Journal of Advanced Manufacturing Technology, Volume (90), No (9), Year (2017-6), Pages (3203-3216)
  31. فرزاد مویدیان , Mehran Kadkhodayan , A modified Burzynski criterion for anisotropic pressure-dependent materials, Sadhana, Volume (42), No (1), Year (2016-1), Pages (95-109)
  32. فرزاد مویدیان , Mehran Kadkhodayan , Non-linear influence of hydrostatic pressure on the yielding of asymmetric anisotropic sheet metals, Mathematics and Mechanics of Solids, Volume (23), No (2), Year (2018-2), Pages (159-180)
  33. mohammadali ghasemabadian , Mehran Kadkhodayan , Investigation of buckling behavior of functionally graded piezoelectric (FGP) rectangular plates under open and closed circuit conditions, Structural Engineering and Mechanics, Volume (60), No (2), Year (2016-11), Pages (271-299)
  34. M. E. Golmakani , Mehran Kadkhodayan , Non-linear Thermo-mechanical Bending Behavior of Thin and Moderately Thick Functionally Graded Sector Plates Using Dynamic Relaxation Method, International Journal of Engineering, Volume (29), No (6), Year (2016-7), Pages (870-878)
  35. esmaeil eshghi , Mehran Kadkhodayan , Sheet Electromagnetic Forming using convex punch instead of concave die, Iranian Journal of Materials Science and Engineering, Volume (13), No (2), Year (2016-3), Pages (1-9)
  36. Farzad Moayyedian , Mehran Kadkhodayan , New implementation of a non-associated flow rule in rate independent plasticity, Journal Of Computational And Applied Research In Mechanical Engineering, Volume (5), No (1), Year (2015-9), Pages (37-49)
  37. Farzad Moayyedian , Mehran Kadkhodayan , An advanced criterion based on non-AFR for anisotropic sheet metals, Structural Engineering and Mechanics, Volume (57), No (6), Year (2016-3), Pages (1015-1038)
  38. Seyed Ali Galehdari , Mehran Kadkhodayan , Saeid Hadidi Moud , Low velocity impact and quasi-static in-plane loading on a graded honeycomb structure; experimental, analytical and numerical study, Aerospace Science and Technology, Volume (47), No (1), Year (2015-11), Pages (425-433)
  39. Hassan Zafarmand , Mehran Kadkhodayan , Free vibration analysis of thick disks with variable thickness containing orthotropic-nonhomogeneous material using finite element method, Journal of Theoretical and Applied Mechanics, Volume (53), No (4), Year (2015-11), Pages (1005-1018)
  40. ehsan afshin , Mehran Kadkhodayan , An experimental investigation into the warm deep-drawing process on laminated sheets under various grain sizes, Materials and Design, Volume (87), No (1), Year (2015-8), Pages (25-35)
  41. Seyed Ali Galehdari , Mehran Kadkhodayan , Saeid Hadidi Moud , Analytical, experimental and numerical study of a graded honeycomb structure under in-plane impact load with low velocity, International Journal of Crashworthiness, Volume (20), No (4), Year (2015-5), Pages (387-400)
  42. mahdi maarefdoust , Mehran Kadkhodayan , Elastoplastic buckling analysis of rectangular thick plates by incremental and deformation theories of plasticity, Proceedings of the Institution of Mechanical Engineers - Part G, Volume (229), No (7), Year (2015-5), Pages (1280-1299)
  43. mahdi maarefdoust , Mehran Kadkhodayan , Elastic/plastic buckling analysis of skew plates under in-plane shear loading with incremental and deformation theories of plasticity by GDQ method, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Volume (37), No (2), Year (2015-3), Pages (761-776)
  44. Farzad Moayyedian , Mehran Kadkhodayan , Modified Burzynski criterion with non-associated flow rule for anisotropic asymmetric metals in plane stress problems, Journal of Applied Mathematics and Mechanics, Volume (36), No (3), Year (2015-3), Pages (303-318)
  45. Farzad Moayyedian , Mehran Kadkhodayan , Combination of Modified Yld2000-2d and Yld2000-2d in Anisotropic Pressure Dependent Sheet Metals, Latin American Journal of Solids and Structures, Volume (12), No (1), Year (2015-2), Pages (92-114)
  46. Hassan Zafarmand , Mehran Kadkhodayan , Three-dimensional stress field analysis of rotating thick bidirectional functionally graded axisymmetric annular plates with nonuniform loads and elastic foundations, Aerospace Science and Technology, Volume (48), No (23), Year (2015-1), Pages (2879-2904)
  47. Farzad Moayyedian , Mehran Kadkhodayan , A closed-form semi analytical elastic-plastic solution for predictiong the onset of flange wrinkling in deep-drawing of a two-layered circular plate, مهندسی مکانیک ایران-Iranian Journal of Mechanical Engineering Transactions of the ISME, Volume (14), No (2), Year (2013-10), Pages (5-36)
  48. Abbas Hosseini , Mehran Kadkhodayan , A hybrid NN-FE approach to adjust blank holder gap over punch stroke in deep drawing process, International Journal of Advanced Manufacturing Technology, Volume (71), No (1), Year (2014-2), Pages (337-355)
  49. mahdi maarefdoust , Mehran Kadkhodayan , Elastic/plastic Buckling Analysis of Skew Thin Plates based on Incremental and Deformation Theories of Plasticity by using Generalized Differential Quadrature Method, International Journal of Engineering, Volume (27), No (8), Year (2014-1), Pages (1277-1286)
  50. Hassan Zafarmand , Mehran Kadkhodayan , Three dimensional elasticity solution for static and dynamic analysis of multi-directional functionally graded thick sector plates with general boundary conditions, Composites Part B: Engineering, Volume (69), No (1), Year (2015-1), Pages (592-602)
  51. FARHAD ALINAGHIZADEH , Mehran Kadkhodayan , Large deflection analysis of moderately thick radially functionally graded annular sector plates fully and partially rested on two-parameter elastic foundation by GDQ method, Aerospace Science and Technology, Volume (39), No (1), Year (2014-10), Pages (260-271)
  52. , Mehran Kadkhodayan , An Investigation into the Thermoelastic Analysis of Circular and Annular Functionally Graded Material Plates, Mechanics of Advanced Materials and Structures, Volume (21), No (1), Year (2014-1), Pages (1-13)
  53. ali rajabi , Mehran Kadkhodayan , Mohsen Manoochehri , Reza Farjadfar , Deep-drawing of thermoplastic metal-composite structures: Experimental investigations, statistical analyses and finite element modeling, Journal of Materials Processing Technology, Volume (215), No (1), Year (2015-1), Pages (159-170)
  54. Farzad Moayyedian , Mehran Kadkhodayan , Implementing the New First and Second Differentiation of a General Yield Surface in Explicit and Implicit Rate- Independent Plasticity, Journal of Solid Mechanics, Volume (6), No (3), Year (2014-9), Pages (310-321)
  55. FARHAD ALINAGHIZADEH , Mehran Kadkhodayan , Investigation of Nonlinear Bending Analysis of Moderately Thick Functionally Graded Material Sector Plates Subjected to Thermomechanical Loads by the GDQ Method, Journal of Engineering Mechanics-ASCE, Volume (140), No (5), Year (2014-5), Pages (4014012-4014012)
  56. Hassan Zafarmand , Mehran Kadkhodayan , Three-dimensional static analysis of thick functionally graded plates using graded finite element method, Proceedings of the Institution of Mechanical Engineers - Part C, Volume (228), No (8), Year (2014-1), Pages (1275-1285)
  57. Mehran Kadkhodayan , mahdi maarefdoust , Elastic/plastic buckling of isotropic thin plates subjected to uniform and linearly varying in-plane loading using incremental and deformation theories, Aerospace Science and Technology, Volume (32), No (1), Year (2014-2), Pages (66-83)
  58. ali rajabi , Mehran Kadkhodayan , An Investigation into the Deep Drawing of Fiber-metal Laminates based on Glass Fiber Reinforced Polypropylene, International Journal of Engineering, Volume (27), No (3), Year (2014-3), Pages (349-358)
  59. Farzad Moayyedian , Mehran Kadkhodayan , A Study on Combination of von Mises and Tresca Yield Loci in Non-associated Viscoplasticity, International Journal of Engineering, Volume (27), No (3), Year (2014-3), Pages (441-448)
  60. Mehran Kadkhodayan , M. E. Golmakani , Non-linear bending analysis of shear deformable functionally graded rotating disk, International Journal of Non-Linear Mechanics, Volume (58), No (1), Year (2014-1), Pages (41-56)
  61. Farzad Moayyedian , Mehran Kadkhodayan , A General Solution For Implicit Time Stepping Scheme in Rate-Dependant Plasticity, International Journal of Engineering, Volume (26), No (6), Year (2013-6), Pages (641-652)
  62. mahdi maarefdoust , Mehran Kadkhodayan , Elastoplastic buckling analysis of plates involving free edges by deformation theory of plasticity, International Journal of Engineering, Volume (26), No (4), Year (2013-4), Pages (421-431)
  63. M. E. Golmakani , Mehran Kadkhodayan , Large deflection thermoelastic analysis of functionally graded stiffened annular sector plates, International Journal of Mechanical Sciences, Volume (69), No (1), Year (2013-1), Pages (94-106)
  64. Mehran Kadkhodayan , Ahmad Erfani Moghadam , G.J.Turvey , J.Alamatian , A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences, Journal of Mechanical Science and Technology, Volume (26), No (10), Year (2012-11), Pages (3231-3242)
  65. Abdolrahman Jaamialahmadi , Mehran Kadkhodayan , A Modified Storen-Rice Bifurcation Analysis of Sheet Metal Forming Limit Diagrams, Journal of Applied Mechanics, Volume (79), No (6), Year (2012-9), Pages (47-56)
  66. Mehran Kadkhodayan , An investigation into the influence of deformables dies on springback of circular plates, Kuwait Journal of Science and Engineering, Volume (33), No (1), Year (2006-1), Pages (215-225)
  67. Mehran Kadkhodayan , Numerical prediction of springback in side-wall curl in U-bending of anisotropic sheet meals, مهندسی مکانیک ایران-Iranian Journal of Mechanical Engineering Transactions of the ISME, Volume (6), No (2), Year (2005-1), Pages (61-70)
  68. Mehran Kadkhodayan , A consistent DXDR method for elastic-plastic problems, Intenational Journal for Numerical Methods in Engineering, Volume (38), No (14), Year (1995-1), Pages (2413-2431)
  69. Mehran Kadkhodayan , A simple algorithm for stamping circular plates by hemispherical punches, Journal of Materials Processing Technology, Volume (68), No (1), Year (1997-6), Pages (33-38)
  70. Mehran Kadkhodayan , Analyses of wrinkling and buckling of elastic plates by DXDR method, Computers & Structures, Volume (65), No (4), Year (1997-11), Pages (561-574)
  71. Mehran Kadkhodayan , Development of the maDR method, Computers & Structures, Volume (52), No (1), Year (1994-7), Pages (1-8)
  72. Mohaamad Rezaiee Pajand , Mehran Kadkhodayan , J. Alamatian , Timestep Selection for Dynamic Relaxation Method, Mechanics Based Design of Structures and Machines, Volume (40), No (1), Year (2012-1), Pages (42-72)
  73. Mehran Kadkhodayan , Ahmad Erfani Moghadam , An investigation of the optimal load paths for the hydroforming of T-shaped tubes, International Journal of Advanced Manufacturing Technology, Volume (61), No (1), Year (2012-4), Pages (73-85)
  74. Mehran Kadkhodayan , Ahmad Erfani Moghadam , Optimization of load paths in X- and Y-shaped hydroforming, International Journal of Material Forming, Volume (6), No (1), Year (2013-3), Pages (75-91)
  75. Mohaamad Rezaiee Pajand , Mehran Kadkhodayan , J. Alamatian , L. C. Zhang , A new method of fictitious viscous damping determination for the dynamic relaxation method, Computers & Structures, Volume (89), No (1), Year (2011-1), Pages (783-794)
  76. , Mehran Kadkhodayan , Large deflection analysis of circular and annular FGM plates under thermo-mechanical loadings with temperature-dependent properties, Composites Part B: Engineering, Volume (42), No (4), Year (2011-1), Pages (614-625)
  77. Mehran Kadkhodayan , , Nonlinear bending analysis of annular FGM plates using higher-order shear deformation plate theories, Composite Structures, Volume (93), No (2), Year (2011-2), Pages (973-982)
  78. Mehran Kadkhodayan , Farzad Moayyedian , Analytical elastic–plastic study on flange wrinkling in deep drawing process, Scientia Iranica, Volume (18), No (2), Year (2011-1), Pages (250-260)
  79. Abdolrahman Jaamialahmadi , Mehran Kadkhodayan , An Investigation Into the Prediction of Forming Limit Diagrams for Normal Anisotropic Material Based on Bifurcation Analysis, Journal of Applied Mechanics, Volume (78), No (3), Year (2011-3), Pages (1-10)
  80. Farzad Moayyedian , Mehran Kadkhodayan , Elastic-Plastic Flange Wrinkling of Circular Plates in Deep Drawing Process, Key Engineering Materials, Volume (462-463), No (1), Year (2011-1), Pages (200-206)
  81. Abdolrahman Jaamialahmadi , Mehran Kadkhodayan , Necking Prediction in Tube Hydroforming by Stress-Based Forming Limit Diagrams, Key Engineering Materials, Volume (462-463), No (1), Year (2011-12), Pages (284-288)
  82. Mehran Kadkhodayan , Ahmad Erfani Moghadam , Mehdi Heidari , Loading path optimization of T-shape tube hydroforming process, Steel Research International, Volume (81), No (9), Year (2010-1), Pages (524-527)
  83. Mehran Kadkhodayan , Rasoul pourhasan , M. Pourhasan , An investigation ino the friction aided deep drawing using four and eight tapered segments, International Review of Mechanical Engineering-IREME, Volume (4), No (1), Year (2010-1), Pages (42-50)
  84. Mehran Kadkhodayan , Iman Zafarparandeh , An investigation into the influence of blankholder force on springback in U-bending, Archives of Metallurgy and Materialls, Volume (54), No (4), Year (2009-10), Pages (1183-1190)
  85. Mehran Kadkhodayan , JAVAD MOSAYEBI , An investigation into the different hardening models in reverese forming of thin sheets, Advances in Mechanical Engineering, Volume (874202), No (127), Year (2009-11), Pages (1-7)
  86. Mehran Kadkhodayan , Iman Zafarparandeh , On the relation of plastic strain and springback in sheet draw bending, International Journal of Material Forming, Year (2008-6)
  87. Mehran Kadkhodayan , Iman Zafarparandeh , U-Bending Analysis with an Emphasis on Influence of Hardening Models, Journal of Aerospace Science and Technology, Volume (5), No (1), Year (2008-1), Pages (45-50)
  88. Mehran Kadkhodayan , Iman Zafarparandeh , A Numerical Study on the Influence of Bauschinger Effect on Springback in Reverse Bending, Computer Methods in Materials Science, Volume (8), No (3), Year (2008-1), Pages (154-159)
  89. Mehran Kadkhodayan , JAVAD ALAMATIAN , G.J.Turvey , A new fictitious time for the dynamic relaxation method, Intenational Journal for Numerical Methods in Engineering, Year (2008-8)
  90. Mehran Kadkhodayan , Springback of laterally loaded circular plates, Key Engineering Materials, Volume (177), Year (2000-1), Pages (479-484)
  91. Mehran Kadkhodayan , Using interlacing and irregulur meshes in plate analysis, Iranian Journal of Science and Technology-Transaction B: Engineering, Volume (26), No (3), Year (2002-1), Pages (419-430)

مقالات ارایه شده در کنفرانس

فارسی

  1. مجید اسکندری شهرکی , محمود شریعتی , مهران کدخدایان , تحلیل خمش نانو ورق مستطیلی با استفاده از تئوری تغییرشکل برشی مرتبه سوم بر مبنای تئوری الاستیسیته تنش کوپل اصلاح شده , بیست و هفتمین همایش سالانه بین المللی مهندسی مکانیک ایران، ISME2019 , 2019-04-30
  2. حامد هیرادفر , رضا ناصری , مهران کدخدایان , محمود شریعتی , بررسی استحکام خمشی تیتانیم خالص تجاری میکرو- نانوساختارشده , سیزدهمین کنفرانس مهندسی ساخت و تولید ایران- 18 الی 20 آبان ماه 13 , 2016-11-08
  3. علی رجبی ایوری , مهران کدخدایان , بررسی ورق های فلز – کامپوزیتی در فرآیند کشش عمیق ومقایسه آن با نتایج تجربی , یازدهمین کنفرانس ساخت و تولید ایران , 2010-10-19
  4. مهران کدخدایان , سعید امیرنژاد آروق , حمیدرضا فضلی شهری , بررسی تجربی و شبیه سازی برگشت فنری در فرآیند خمکاری V شکل برای ورق چند لایه کامپوزیتی فلزی- الیافی (FML) , یازدهمین کنفرانس ساخت و تولید ایران , 2010-10-19
  5. مهران کدخدایان , علی محمد ناصریان نیک , محمداسماعیل گل مکانی , شبیه سازی اثرات کشش ورق و مدل های سخت شوندگی بر روی پدیده برگشت پذیری در فرآیند خمشی- کششی L شکل , چهارمین کنفرانس شکل دهی فلزات و مواد ایران , 2008-12-03
  6. مهران کدخدایان , فرزاد مؤیدیّان , بررسی تحلیلی چروکیدگی لبه پلاستیک صفحات گرد با استفاده از تئوری تغییر شکل کوچک در فرآیند کشش عمیق , چهارمین کنفرانس شکل دهی فلزات و مواد ایران , 2008-12-03
  7. مهدی معارف دوست , جعفر زارع , مهران کدخدایان , شبیه سازی و تحلیل فرآیند آهنگری داغ دنده قفل کن بالابرهای صنعتی , دهمین کنفرانس مهندسی ساخت و تولید ایران , 2010-03-01
  8. فرزاد مؤیدیّان , مهران کدخدایان , به دست آوردن پاسخی صریح برای چروکیدگی لبه صفحات گرد به کمک ورق گیر در طی فرآیند کشش عمیق با استفاده از تئوری تغییر شکل کوچک , دهمین کنفرانس مهندسی ساخت و تولید ایران , 2010-03-01
  9. مهران کدخدایان , احمد عرفانی مقدم , مهدی حیدری , یافتن مسیرهای بارگذاری بهینه در فرآیند هیدروفرمینگ لوله های T شکل , دهمین کنفرانس مهندسی ساخت وتولید , 2010-03-01
  10. مهران کدخدایان , احمد عرفانی مقدم , مهدی حیدری , بهینه سازی پارامترهای بارگذاری فرآیند هیدروفرمینگ اتصالات T شکل با روش الگوریتم تبرید تدریجی , نهمین کنفرانس هوا فضای ایران , 2010-02-08
  11. مهران کدخدایان , مدلسازی تغییر شکل لوله بر اساس پارامترهای بارگذاری در فرایند هیدروفرمینگ , نهمین کنفرانس هوا فضای ایران , 2010-02-08
  12. مهران کدخدایان , بررسی اثر پانچ متقابل در قابلیت شکل پذیری هیدروفرمینگ Y شکل لوله ها , هشتمین کنفرانس بین المللی هوا فضای ایران , 2009-02-17
  13. مهران کدخدایان , An investigation to the orthotropic plates by using irrgular rectilinear mesh , modeling, identification and control , 2007-02-14
  14. مهران کدخدایان , بررسي تاثير مشخصات الاستومر در كنترل پديده چروكيديگي در صفحات نازك فلزي تحت خمش بر روي تكيه گاه الاس , اولين كنفرانس شكل دهي فلزات و مواد , 2002-05-08
  15. مهران کدخدایان , بررسي روش هاي تعيين برگشت پذيري در صفحات غير ايزوتروپ , دهمين كنفرانس سالانه بين المللي مهندسي مكانيك دانشگاه صنعتي خواجه نصيرالدين طوسيisme 2002 , 2002-05-25
  16. مهران کدخدایان , بررسي خمش الاستيك - پلاستيك و رقم هاي گرد بر روي قالب هاي تغيير شكل پذير , نهمين كنفرانس سالانه و پنجمين كنفرانس بين المللي مهندسي مكانيك isme2001 , 2001-05-27

انگلیسی

  1. Mehran Kadkhodayan , ehsan afshin , Thinning behavior of laminated sheets metal in warm deep-drawing process under various grain sizes , Numerical Methods in Industrial Forming Processes (NUMIFORM2016 , 2016-07-04
  2. Mehran Kadkhodayan , ehsan afshin , AN EXPERIMENTAL STUDY ON WARM DEEP-DRAWING PROCESS OF LAMINATED SHEETS UNDER VARIOUS HEAT TREATMENTS , Forming Technology Forum 2014 , 2014-09-15
  3. Mehran Kadkhodayan , A. Hosseini , The Optimization of Blank Holder Gap Profile in Deep Drawing Process , ICME2011 , 2011-12-27
  4. Mehran Kadkhodayan , A. Hosseini , The Effect of Blank Holder Gap Profile upon Section Thickness Distribution in Deep Drawing Process , ICME2011 , 2011-12-27
  5. A. Einafshar , Mehran Kadkhodayan , Jalil Rezaee Pazhand , APPLYING DYNAMIC RELAXATION METHOD IN BENDING ANALAYSIS OF MULTILAYER COMPOSITE PLATES WITH DIFFERENT GEOMETRICAL CIRCULAR SHAPES , 23rd Canadian Congress of Applied Mechanics, CANCAM2011 , 2011-07-05
  6. saeed amirnezhad , Mehran Kadkhodayan , Hamid reza Fazli shahri , A numerical and experimental study on bending ability of glass fiber metal laminate composite , The 2nd International Conference on Composites: Characterization, Fabrication and Application (CCFA-2) , 2010-12-27
  7. mahdi maarefdoust , Mehran Kadkhodayan , Simulation and analysis of hot forging for industrial locking gear elevators , 10th International Conference on Numerical Methods in Industrial Forming Process, Numiform 2010 , 2010-06-13
  8. Mehran Kadkhodayan , Ahmad Erfani Moghadam , Mehdi Heidari , Loading Path Optimization of T-shape Tube Hydroforming Process , 13th International Conference on Metal Forming , 2010-09-19
  9. Farzad Moayyedian , Mehran Kadkhodayan , Elastic-Plastic Flange Wrinkling of Circular Platesin i Deep Drawing Process , 8th International Conference on Fracture and Strength of Solids (FEOFS) 2010 , 2010-06-06
  10. Mehran Kadkhodayan , Iman Zohourkari , An Investigation into the Springback in Bending of Unsymmetrical Sheet Metal Laminates , 8th International Conference on Fracture and Strength of Solids (FEOFS) 2010 , 2010-06-06
  11. Abdolrahman Jaamialahmadi , Mehran Kadkhodayan , Necking prediction in tube hydroforming by stress-based forming limit diagrams , 8th International Conference on Fracture and Strength of Solids (FEOFS) 2010 , 2010-06-06
  12. Abdolrahman Jaamialahmadi , Mehran Kadkhodayan , The effect of anisotropy on forming limit diagrams based on bifurcation analysis , 8th International Conference on Fracture and Strength of Solids (FEOFS) 2010 , 2010-06-06
  13. Abdolrahman Jaamialahmadi , Mehran Kadkhodayan , ehsan masoumi khalil Abad , Application of Neural Network and FEM to optimize ‎load path of T-shape tube hydroforming , دومین کنفرانس بین المللی ساخت و تولید (TICME 2007) , 2007-12-10
  14. Mehran Kadkhodayan , An Investigation into the Optimization of Loading Path in T-shape of Tube Hydroforming , 10th International Conference on Numerical Methods in Industrial Forming Process, Numiform 2010 , 2010-06-13
  15. Mehran Kadkhodayan , Farzad Moayyedian , An analytical study on elastic flange wrnkling of laminated circular plates in deep drawing process , 17th International Conference on Mechanical Engerring , 2009-05-19
  16. Mehran Kadkhodayan , Rasoul pourhasan , Springback simulation of friction aided deep drawing process , Iran International Aluminum Conference-IIAC2009 , 2009-04-22
  17. Farzad Moayyedian , Mehran Kadkhodayan , The Effect of Blankholder on Flange Plastic Wrinkling of Laminated Circular Plates in Deep Drawing Process , دهمین کنفرانس مهندسی ساخت وتولید ایران , 2010-03-01
  18. Mehran Kadkhodayan , مطالعه تحلیلی چروکیدگی پلاستیک لبه صفحات گرد با کمک ورق گیر و با استفاده از تئوری تغییر شکل بزرگ در فرایند کشش عمیق , هشتمین کنفرانس بین المللی هوا فضای ایران , 2009-02-17
  19. Mehran Kadkhodayan , An analytical solution to investigate the springback in unsymmetric Al-Steel wide laminates , 16th Annual (International) Conference on Mechanical Engineering , 2008-05-13
  20. Mehran Kadkhodayan , Springback measurment in reverse cup drawing prorcess , 16th Annual (International) Conference on Mechanical Engineering , 2008-05-13
  21. Mehran Kadkhodayan , AN INVESTIGATION TO THE SPRINGBACK OF REVERSE , 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processe , 2008-09-01
  22. Mehran Kadkhodayan , Iman Zafarparandeh , Masoud Tahani , U-Bending Analysis with an Emphasis on Influence of Hardening Models , The 7th Iranian Aerospace Society Conference , 2008-02-19
  23. Mehran Kadkhodayan , L-bending analysis with an emphasis on springback , 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processe , 2008-08-31